Hi,
I just went to try an generate my first paths and found there was no post processor for Gbrl (mm) as there is for VCarve. I tried to copy the .pp file from Vacrve to PhotoVcarve as found online,
but there is an error returned for an unknow statement.. ANyone go thru this yet?
I am running a mini mill using a CNC Pro board and using straight Gbrl..
Thabks
G.,
Photovcarve - GBRL Post Processor Problem
Re: Photovcarve - GBRL Post Processor Problem
I tried commenting out the line and ran the resulting gcode and it ran well.. actually very well.. Surpised and pretty happy with the results from a very difficult pic..
Regards
Regards