Photocarve & Shark laser

This forum is for general discussion about PhotoVCarve.

Photocarve & Shark laser

Postby mike97520 » Tue Apr 10, 2018 7:41 pm

I have a Shark HD3 with the laser attachment. I have done several things with Aspire 9 and the results were pretty nice. I also have Photocarve 1.102 and thought it would be cool to photocarve some pictures with the laser. So far, I can't find out how to select the shark laser like I do in Aspire 9. I can still select an engraving bit and select the spindle speed of 1000 ( Laser on) and the feed rate of 40. But it doesn't allow me to select the depth/pressure of .001 inches so I can preview the engraving nor select the post processor = CNCShark-laser (inch) (*.tap) Has anyone else been able to laser with Photocarve?
mike97520
 
Posts: 1
Joined: Sun Oct 18, 2015 6:22 am
Model of CNC Machine: shark hd

Re: Photocarve & Shark laser

Postby Adrian » Tue Apr 10, 2018 9:30 pm

Lasers don't really work with PhotoVCarve type images as the image is formed from varying widths and depths from what I've seen in previous posts on the subject.
User avatar
Adrian
Vectric Archimage
 
Posts: 8344
Joined: Thu Nov 23, 2006 2:19 pm
Location: Surrey, UK
Model of CNC Machine: ShopBot PRS Alpha 96x48

Re: Photocarve & Shark laser

Postby Jhodge76 » Fri Apr 13, 2018 2:50 pm

Hi,

The Laser module from next wave has its own software for using the laser with lasering photographs. I've only tested it a couple times. Most of my lasering is done with Vcarve, but I do more graphics and not photos.

Jonathan
Jhodge76
 
Posts: 7
Joined: Thu Dec 21, 2017 8:41 pm
Location: New Jersey, USA
Model of CNC Machine: Shark HD4


Return to PhotoVCarve - General

Who is online

Users browsing this forum: No registered users and 3 guests