hello I have done a few successful carvings with this software, but I am now struggling with a photo of 3 dogs. I hope someone can give me some advise.
once I load the photo into Vcare this is not picking up any of the features of the dogs.
I would be very great full for and advise
thanks Dave
Photo Problems with Vcare
- martin54
- Vectric Archimage
- Posts: 7355
- Joined: Fri Nov 09, 2012 2:12 pm
- Model of CNC Machine: Gerber 48, Triac PC, Isel fixed gantry
- Location: Kirkcaldy, Scotland
Re: Photo Problems with Vcare
Quality & subject of photos play a big part, not all photos will make great carvings & sometimes it's best to select a different picture from what I have read. Do you have any photo editing software at all as you may need to make changes to the original to obtain something that will carve well.
Sorry can't offer any personal experience as it's not something I have been able to get the best results with myself but that is down to operator error not the software.
Sorry can't offer any personal experience as it's not something I have been able to get the best results with myself but that is down to operator error not the software.
-
- Vectric Craftsman
- Posts: 130
- Joined: Thu Oct 06, 2011 11:40 am
- Model of CNC Machine: home built and modified Vytek rebel
- Location: Troutman, NC
Re: Photo Problems with Vcare
Hi Dave
would it be possible for you to load the picture of the dogs, so we would have a better idea of what the problem might be ?
Glenn
would it be possible for you to load the picture of the dogs, so we would have a better idea of what the problem might be ?
Glenn