Cabinet Package Gadget

This forum has been created for users to submit suggestions for Gadgets
Post Reply
User avatar
Ken Rychlik
Vectric Craftsman
Posts: 183
Joined: Tue Feb 24, 2009 6:24 pm
Model of CNC Machine: Buy, fix, and sell them
Location: Soutwest of Houston (Cabinetry)

Cabinet Package Gadget

Post by Ken Rychlik »

I have a working Excel file that creates CSV files that when used with Paul Rowntree's csv to 2d vectors it will create all parts of a cabinet with full dado's. I have been building cabinets for a living for quite some time and I still hand drew lots of parts. I am wondering if someone is willing to help turn this into a useable stand alone gadget without the need to create the CSV's in excel. It would consist of a fill in sheet for specs, then a master selection page for entering the size and type of cabinet. Sub pages would do the calculations that excel does and have it put the parts directly in Vcarve or aspire.

I use toolpath templates from there as my parts go into vcarve with layers. Automatic toolpaths that would work with it would be nicer than having to create the toolpaths, even though the use of templates makes it very easy. I'm just trying to save some steps on my end of file creation, but what I have is functioning well.

The third request would be part nesting instead of my crude way of calculating where the parts go.

I have included some screen shots of what I have working and one of the upper cabinets created and imported into Vcarve.

I'm wondering if any Gadget Guru's are willing to tackle the project.

Ken
Attachments
Xl page 1 for gadget.PNG
Xl spec page for gadget.PNG
One cabinet type page for gadget.PNG
Vcarve of upper.PNG
Custom CNC Work
Local Machine Repairs and Programming

Beltramidave
Vectric Wizard
Posts: 520
Joined: Thu May 14, 2015 12:23 am
Model of CNC Machine: FLA Saturn 4x4 / 7W & 60W lasers
Location: Bemidji, MN
Contact:

Re: Cabinet Package Gadget

Post by Beltramidave »

Wow, that would be awesome.
Hope someone can help you out. Way above my expertise.
Dave
https://lakesedgewoodcraft.com/

User avatar
Adrian
Vectric Archimage
Posts: 14503
Joined: Thu Nov 23, 2006 2:19 pm
Model of CNC Machine: ShopBot PRS Alpha 96x48
Location: Surrey, UK

Re: Cabinet Package Gadget

Post by Adrian »

There are lots of cabinet systems that work well with VCarve out there already. Have you tried those? Developing a gadget is not going to be as full featured as those packages and isn't a trivial thing to code. I did a similar system for Sketchup in the pre-Google days and it takes a while.

What's wrong with the nesting in VCarve?

User avatar
Ken Rychlik
Vectric Craftsman
Posts: 183
Joined: Tue Feb 24, 2009 6:24 pm
Model of CNC Machine: Buy, fix, and sell them
Location: Soutwest of Houston (Cabinetry)

Re: Cabinet Package Gadget

Post by Ken Rychlik »

It is very usable as is. I have ran multiple programs and I know their cost. Getting every option with any program never did satisfy me. I also wanted to be able to share it with people that don't have excel, so the two choices are a stand alone program, or gadget. I'm looking in the gadget info, trying to find what It needs to see to create another sheet right now.

It may be possible to have a gadget for an upper cabinet, another for a base, drawer base, etc....

Ken
Custom CNC Work
Local Machine Repairs and Programming

kyeakel
Vectric Craftsman
Posts: 108
Joined: Tue Oct 28, 2014 3:42 pm
Model of CNC Machine: Camaster Stinger STV4800
Location: Curwensville, PA

Re: Cabinet Package Gadget

Post by kyeakel »

Will it work in LibreOffice? I've dropped M__soft Office and use this in it's place. (it's free)

Kipp
CAMaster Stinger 1
Shopbot PRT 9648
STV4800
Aspire
Cut2d,Cut2dLaser

User avatar
Ken Rychlik
Vectric Craftsman
Posts: 183
Joined: Tue Feb 24, 2009 6:24 pm
Model of CNC Machine: Buy, fix, and sell them
Location: Soutwest of Houston (Cabinetry)

Re: Cabinet Package Gadget

Post by Ken Rychlik »

I have no idea if the excel imitation program will run excel macros or VB code. Thats why I'm leaning towards a gadget. It would be self contained. Ken
Custom CNC Work
Local Machine Repairs and Programming

User avatar
jimandi5000
Vectric Wizard
Posts: 1046
Joined: Wed Mar 11, 2015 6:50 pm
Model of CNC Machine: Home Made 60 x 120
Location: North Houston Tx.
Contact:

Re: Cabinet Package Gadget

Post by jimandi5000 »

Hi Kim,

I am writing one... I built one for AutoCAD and other software (lite) for a company (sorry I cannot share it). I am not sure the timing you want this done.

How can I help?
Jim


PS: Here is a box-joint Gadget I made in 2015. have a look and see if the quality is inline your thoughts.
Attachments
Box Joint Gadget.zip
(1.13 MiB) Downloaded 477 times
Thanks,
Jim

Boatguy1979
Posts: 6
Joined: Tue Jan 22, 2019 4:32 am
Model of CNC Machine: Shark ii

Re: Cabinet Package Gadget

Post by Boatguy1979 »

I would like to know how i can try the cabinet package gadget. I have Aspire 10


thanks,

Keith

User avatar
jimandi5000
Vectric Wizard
Posts: 1046
Joined: Wed Mar 11, 2015 6:50 pm
Model of CNC Machine: Home Made 60 x 120
Location: North Houston Tx.
Contact:

Re: Cabinet Package Gadget

Post by jimandi5000 »

Boatguy1979 wrote:I would like to know how i can try the cabinet package gadget. I have Aspire 10


thanks,

Keith

Hi Keith,

How can I help?
Do you want to have a call and wall through it?
Thanks,
Jim

Post Reply