Easy Euro Door Hinges Maker

This forum is for users to submit their own gadgets to the community

Easy Euro Door Hinges Maker

Postby jimandi5000 » Thu Oct 31, 2019 2:28 am

Hi all,
I hope you are doing well today.

Just completed a new gadget the "Euro style door hinge pocket maker. To use the tool select the outer edge (closed polyline) of the door and then start the Gadget the dialog will let you put hinges on any side of the door and you can put 2, 3, or 4 hinges on the door. Enter your hinge dimensions on the dialog and they will be saved and reloaded the next time you run the gadget. I looked at the Blum site https://www.blum.com/us/en/products/hingesystems/clip-top-blumotion/overview/ to get the hole sizes and spacing. Have a look and I need some feedback.
Attachments
Hinge1.jpg
Hinge3.jpg
Hinge4.jpg
EasyCabinetTools.zip
(1.38 MiB) Downloaded 30 times
Borning_Patterns.jpg
Hinge2.jpg
(3.11 KiB) Not downloaded yet
Thanks,
Jim
User avatar
jimandi5000
Vectric Apprentice
 
Posts: 67
Joined: Wed Mar 11, 2015 6:50 pm
Location: North Houston Tx.
Model of CNC Machine: Home Made 60 x 120

Re: Easy Euro Door Hinges Maker

Postby Holzarbeiter » Thu Oct 31, 2019 2:51 am

Holy cow, Jim, this looks really cool! You have been busy cranking out some very useful stuff to the forum members.
Im going to download this and see what it does. I only have a small 2 x4’ machine but for hanging cabinet doors this looks very promising. Thank you so much for your time and talent and willingness to share!
Joe

I have a chip on my shoulder....several more in my hair and lots more all over my shop floor.
Holzarbeiter
Vectric Apprentice
 
Posts: 74
Joined: Thu Apr 06, 2017 3:07 am
Location: Addison, PA
Model of CNC Machine: Camaster Stinger SR24

Re: Easy Euro Door Hinges Maker

Postby jimandi5000 » Thu Oct 31, 2019 3:00 am

Holzarbeiter wrote:Holy cow, Jim, this looks really cool! You have been busy cranking out some very useful stuff to the forum members.
Im going to download this and see what it does. I only have a small 2 x4’ machine but for hanging cabinet doors this looks very promising. Thank you so much for your time and talent and willingness to share!


You are so welcome... I physical cannot get in the shop right now so I am trying to learn how to write Vcarve gadgets. If you have a Gadget need... let me know.
Thanks,
Jim
User avatar
jimandi5000
Vectric Apprentice
 
Posts: 67
Joined: Wed Mar 11, 2015 6:50 pm
Location: North Houston Tx.
Model of CNC Machine: Home Made 60 x 120

Re: Easy Euro Door Hinges Maker

Postby Holzarbeiter » Thu Oct 31, 2019 3:31 pm

jimandi5000 wrote:
Holzarbeiter wrote:Holy cow, Jim, this looks really cool! You have been busy cranking out some very useful stuff to the forum members.
Im going to download this and see what it does. I only have a small 2 x4’ machine but for hanging cabinet doors this looks very promising. Thank you so much for your time and talent and willingness to share!


You are so welcome... I physical cannot get in the shop right now so I am trying to learn how to write Vcarve gadgets. If you have a Gadget need... let me know.



Well, off the top of my head I can't think of any....but I will consider your offer a challenge!
Joe

I have a chip on my shoulder....several more in my hair and lots more all over my shop floor.
Holzarbeiter
Vectric Apprentice
 
Posts: 74
Joined: Thu Apr 06, 2017 3:07 am
Location: Addison, PA
Model of CNC Machine: Camaster Stinger SR24


Return to Gadgets - User Submissions

Who is online

Users browsing this forum: No registered users and 4 guests