I did some asking about an issue with Vectrics Chamfer gadget, and they did a new upload on their gadget collection to fix the issue. I also asked about the Chamfer Radius gadget that I got off this forum last year.. here is that exchange
Mark Moran (Vectric Ltd.)
Jan 2, 14:47 WET
Thank you for the follow-up email.
I am afraid that we would not be able to amend a gadget that we have not written.
You would need to get in touch with the author to see if a later version is available.
Jan 2, 14:38 WET
Thank you for the quick response, I'll look into it when I get home after work.
There is another gadget that has an odd situation. It's called Chamfer Radius, and I first downloaded it from the Vectric Forum a while back, it's not available from the Vectric gadget collection. It was while I was using the previuos version of Vcarve Pro, 8.5 I believe. I had it set up and used in a number of files that I transferred over to 9.0, and they work fine, unless I recalculate all the toolpaths in one of those files. ReCalculating one or more of the toolpaths other than the Chamfer Radius toolpath works fine, and the Chamfer radius toolpath stays in working order, as long as I don't recalculate it.
It seems to work as a holdover on files originally set up in Pro 8.0/8.5 and used in 9.0... but it will not work when installed in 9.012 and creating a new toolpath. I get an error message that some lines of code are not good...(I don't have the error in front of me, I could send it if needed.)
I know this is not a Vectric gadget, but if there is someway to make it work in my current version of V Carve Pro, I would appreciate it...
I do use this gadget and if it could be fixed to work in VCarve Pro 9+, I would be very grateful...