Couple new ones

An area to upload images of pieces cut using VCarve Pro

Couple new ones

Postby Kimon » Fri Aug 18, 2006 10:56 pm

Couple of new test runs
Attachments
100_0964.JPG
Faux aged and distressed French Country House Plaque
1/4 end mill for roughing 120 degree 1.5 inch v-bit for finish and vcarve
Rattle Can White primer 2lb Shellac sand to distress, shellac with a spit coat.
(497.44 KiB) Downloaded 353 times
100_0965.JPG
Faux Copper patina with a vector art 3d clip of a sailboat (thanks James your work makes me look good)
1/4" Endmill for roughing, 1/4" Ball Nose for finish, 1/2" vibit for v-carve
Rattle Can Copper, Latex turquose
(550.4 KiB) Downloaded 338 times
User avatar
Kimon
Vectric Craftsman
 
Posts: 221
Joined: Wed Jul 05, 2006 3:21 pm

Postby Tony Mac » Fri Aug 18, 2006 11:11 pm

Hi Kimon,

Nice signs and it sure looks like the Techno router is earning its keep.

Tony
User avatar
Tony Mac
Vectric Alumni
 
Posts: 1965
Joined: Sat Jul 30, 2005 6:24 pm
Location: UK

Postby Les_linton » Fri Aug 18, 2006 11:20 pm

Very nice Kimon!!

I'm going to have to just quit doing things for customers and do some of those things for myself...

Great work...

Les
User avatar
Les_linton
Vectric Craftsman
 
Posts: 148
Joined: Sun May 28, 2006 5:52 pm
Location: Pekin, IL
Model of CNC Machine: ViperX7

Postby Les_linton » Fri Aug 18, 2006 11:21 pm

Should have asked...

Substrate???

Les
User avatar
Les_linton
Vectric Craftsman
 
Posts: 148
Joined: Sun May 28, 2006 5:52 pm
Location: Pekin, IL
Model of CNC Machine: ViperX7

Postby Kimon » Fri Aug 18, 2006 11:51 pm

Both are 3/4" MDF Sealed with PVA Glue before priming.
User avatar
Kimon
Vectric Craftsman
 
Posts: 221
Joined: Wed Jul 05, 2006 3:21 pm

Postby dighsx » Sat Aug 19, 2006 12:17 am

I really like the faux finish on the one. Was it hard to do?
Take it easy.
Jay (www.cncjay.com)
User avatar
dighsx
Vectric Wizard
 
Posts: 941
Joined: Tue Nov 01, 2005 12:36 am
Location: Royal Oak, Michigan USA

Postby Paul_n » Sat Aug 19, 2006 2:00 am

Kimon...

Both samples are great, I really like the copper one, and the materials
you used. Have you looked at the metal coat products from ?
http://www.sculptnouveau.com/

Attached is one that I did using the copper metal coat, and the different
spray on patinas. They also have colored waxes that add great effects.

Paul N

PS... the design was mine, with James Booth doing the great 3D file work for me !!
Attachments
Copper01.jpg
(46.17 KiB) Downloaded 237 times
User avatar
Paul_n
Vectric Wizard
 
Posts: 314
Joined: Mon Aug 22, 2005 1:12 am
Location: Cartersville, Georgia
Model of CNC Machine: ShopBot PR96

Postby Kimon » Sat Aug 19, 2006 12:47 pm

Nice Paul very nice.

As you can tell I have been playing with Fauxs next project is rusted wood. Then mabye a combination piece.
User avatar
Kimon
Vectric Craftsman
 
Posts: 221
Joined: Wed Jul 05, 2006 3:21 pm


Return to VCarve - Gallery

Who is online

Users browsing this forum: No registered users and 4 guests