Carry out coffee cup holder-with files.

An area to upload images of pieces cut using VCarve Pro
Post Reply
User avatar
FixitMike
Vectric Wizard
Posts: 2173
Joined: Sun Apr 17, 2011 5:21 am
Model of CNC Machine: Shark Pro Plus (retired)
Location: Burien, WA USA

Carry out coffee cup holder-with files.

Post by FixitMike »

Coffee holder 1a  .jpg
Coffee holder 2a.jpg
I've had more than 150 requests and downloads of the files for this project, so this is a repeat post to consolidate them.

Be sure to read the file Coffee holder 5a.doc for instructions.

The .tap files are for a Shark Pro Plus. The .crv files were generated using VCarvePro 7.0.

I also have attached a dxf version of the files in case you don't have VCarve Pro 7.0.

Don't hesitate to contact me if you have any questions or suggestions
and have fun.
Attachments
Coffee Holder .zip
For those who can open VCP 7.0 files
(1.35 MiB) Downloaded 1079 times
Coffee holder dxf.zip
DXF files
(1.27 MiB) Downloaded 841 times
Good judgement comes from experience.
Experience comes from bad judgement.

roy_okc
Vectric Craftsman
Posts: 118
Joined: Mon Sep 19, 2011 12:02 am
Model of CNC Machine: DIY 80/20 ~18"x48", Mach 3
Location: Moore, OK, USA

Re: Carry out coffee cup holder-with files.

Post by roy_okc »

Mike,

Thank you for posting your project and files. That's a really neat project. I'm going to D/L for when I upgrade to VCP 7 (or rebuild in 6.5).

Roy

subsea
Vectric Craftsman
Posts: 135
Joined: Tue Jun 05, 2012 12:45 am
Model of CNC Machine: Zenbot 2448
Location: Belpre Ohio

Re: Carry out coffee cup holder-with files.

Post by subsea »

Mike,
Received your files via email. Thanks you for the design, files, and most of all the amount of time you have contributed to this effort.
Regards, - Bill

kzeyus
Vectric Wizard
Posts: 346
Joined: Wed Sep 27, 2006 4:05 pm
Location: Rogers, AR

Re: Carry out coffee cup holder-with files.

Post by kzeyus »

Thanks for sharing!
Ken Zey
Rogers, AR
http://www.CedarSlabSigns.com
http://www.lookoutmercantile.com
Shopbot PRS Alpha 72x144

Roy Esslinger
Posts: 46
Joined: Wed Dec 25, 2013 4:10 am
Model of CNC Machine: home built
Location: Missouri U.S.A.

Re: Carry out coffee cup holder-with files.

Post by Roy Esslinger »

Hi Mike first of all thank yo for giving me the .dxf.zip file to download but now the problem I have is I only have Cut2d as a new user and I cant figure out how to get them over to my Cut2d program I can open the document with word but don't know how to get the other files to load.

User avatar
FixitMike
Vectric Wizard
Posts: 2173
Joined: Sun Apr 17, 2011 5:21 am
Model of CNC Machine: Shark Pro Plus (retired)
Location: Burien, WA USA

Re: Carry out coffee cup holder-with files.

Post by FixitMike »

Roy, I don't have Cut2D, so I don't know how to answer you. I only have VCarvePro. Possibly you could find a free AutoCad clone and load the dxf files into it to see them.

Mike
Good judgement comes from experience.
Experience comes from bad judgement.

User avatar
ssflyer
Vectric Wizard
Posts: 912
Joined: Wed Nov 26, 2008 8:21 pm
Model of CNC Machine: ShopBot PRSAlpha 96x60
Location: Napa County, California

Re: Carry out coffee cup holder-with files.

Post by ssflyer »

I don't have Cut2D, either, but I would assume you simply import the DXF file into Cut2D, as you would in Aspire or VCarve Pro.
Ron Sloan

User avatar
Phil
Vectric Wizard
Posts: 3026
Joined: Thu Nov 17, 2005 10:56 pm
Location: Pittsfield, MA

Re: Carry out coffee cup holder-with files.

Post by Phil »

Thanks.

Phil

User avatar
scotttarnor
Vectric Wizard
Posts: 941
Joined: Fri Aug 30, 2019 11:40 pm
Model of CNC Machine: Piranha XL , Shark HD520
Location: La Crosse WI

Re: Carry out coffee cup holder-with files.

Post by scotttarnor »

Wow this is cool! Thank You for sharing !
9 years ago I am glad Phil found this !
Scott T

@scottscnc

Post Reply