Gallery Of Machines

An area to upload images of pieces cut using VCarve Pro

Re: Gallery Of Machines

Postby IslaWW » Sun Jun 17, 2018 3:59 am

Here is a video of a new machine in development. Purpose was more to test multiple tools using a preset Z Zero to bed rather than surface. Model is one of the included clip art. Toolpath with VCPro.

https://youtu.be/fjk9FjHg4vg
Gary Campbell
CNC Technology & Training
The Ultimate Woodworking Machine
GCnC411 (at) gmail.com
User avatar
IslaWW
Vectric Wizard
 
Posts: 1124
Joined: Wed Nov 21, 2007 11:42 pm
Location: Marquette, MI, USA
Model of CNC Machine: The Ultimate Woodworking Machine

Re: Gallery Of Machines

Postby Rcnewcomb » Sun Jun 17, 2018 5:35 am

Fine looking machine!
- Randall Newcomb
10 fingers in, 10 fingers out - another good day in the shop
User avatar
Rcnewcomb
Vectric Wizard
 
Posts: 3115
Joined: Fri Nov 04, 2005 5:54 am
Location: San Jose, California, USA
Model of CNC Machine: GCnC/WinCNC

Re: Gallery Of Machines

Postby LittleGreyMan » Sun Jun 17, 2018 11:47 am

Nice sturdy machine, Gary.

How did you hold the model at the end of the cut? A manually removed onion skin?

For those who hesitate spending more bucks to buy a sturdy machine versus a light one, have a look at Gary's video.

A cheap machine can't simply achieve this quality level and a lot of issues I've seen on this forum can be avoided with a serious CNC like this one.
Best regards

Didier

W7 - Aspire 8.517
LittleGreyMan
Vectric Wizard
 
Posts: 847
Joined: Fri May 15, 2015 1:10 pm
Location: France
Model of CNC Machine: 3 axis small size machine

Re: Gallery Of Machines

Postby IslaWW » Sun Jun 17, 2018 12:23 pm

LGM...
You're right on. Material was .9" I took two .4" passes and left a .1" onionskin. A lot of users overlook the importance of good hold down when trying to obtain a good finish. The rigidity of the machine and power of the servos don't hurt either!
Gary Campbell
CNC Technology & Training
The Ultimate Woodworking Machine
GCnC411 (at) gmail.com
User avatar
IslaWW
Vectric Wizard
 
Posts: 1124
Joined: Wed Nov 21, 2007 11:42 pm
Location: Marquette, MI, USA
Model of CNC Machine: The Ultimate Woodworking Machine

Re: Gallery Of Machines

Postby MoHawk » Sat Aug 11, 2018 4:50 pm

About 2.5 years ago I started designing a cnc router build. After buying a few parts, I decided it was going to take more time than I wanted to spend on the project. I sold all of the parts I had accumulated and ordered a CNC Router Parts 4824 Pro. Shortly after I started assembly CNCRP came out with their upgraded Pro that had linear rails. I made a call to them and found they would supply the linear rail conversion to recent buyers at a reduced price, which I ordered. I'm glad I made the decision to purchase their kit; it was very easy to assemble and get into production. I use it for my own hobby work.
Attachments
Front View Monitors.jpg
MoHawk
 
Posts: 4
Joined: Tue Jan 11, 2011 4:41 pm
Location: Mid Missouri
Model of CNC Machine: CNC Router Parts Pro 4824

Re: Gallery Of Machines

Postby gad5264 » Wed Oct 24, 2018 7:06 pm

My build of a Dave Gatton GarageworX 18x24

Image
Grant "gad5264"
Westerville, OH
gad5264
 
Posts: 25
Joined: Wed Dec 03, 2014 5:33 pm
Location: Westerville, OHIO
Model of CNC Machine: GarageWorX 4'x4' using VCarvePro V9.0

Previous

Return to VCarve - Gallery

Who is online

Users browsing this forum: No registered users and 18 guests