Page 4 of 6

Re: YouTube Videos - Show us what you are cutting

PostPosted: Thu Jun 09, 2011 2:50 am
by swaggs21
Here is a new one, first real project on the behemoth. To bad is was 7"x 5.5" :o

http://www.youtube.com/watch?v=BwQuoOk29xk

Re: YouTube Videos - Show us what you are cutting

PostPosted: Tue Sep 20, 2011 1:47 am
by krtwood
http://www.youtube.com/watch?v=RCGucPF3Ho8

A little video of my attempt at turning a fractal into something that looks like a chip carving. Lots and lots of hours in vcarve resizing and moving groups of vectors around. Machined in mahogany which seems to hold up to those pockets right next to each other across the grain pretty well.

Re: YouTube Videos - Show us what you are cutting

PostPosted: Thu Sep 22, 2011 11:08 pm
by pben
Here's a clip from my workshop:
http://youtu.be/Rv6t7P-Sqmg
I'm routing the outlines and soundhole of a concert guitar soundboard. The workpiece is held with vacuum and the white vacuum board is made out of high pressure laminate (similar to Formica, only 1/2" thick). It works like a dream...

Regards
Peter

Re: YouTube Videos - Show us what you are cutting

PostPosted: Sat Jan 07, 2012 3:36 am
by JohnJackson
Here is a video of VCarving a corporate logo into a mahogany door panel. Cross posted from another message.

http://youtu.be/BRToLV-X_0U

Thanks,

John Jackson
Russell ON

Re: YouTube Videos - Show us what you are cutting

PostPosted: Mon Jan 09, 2012 12:55 am
by bgriggs
Hee is a video of cutting a Boy Scout Emblem that I designed in Aspire.

http://youtu.be/fID-wI05vf0

Bill

Re: YouTube Videos - Show us what you are cutting

PostPosted: Mon Jan 09, 2012 4:11 am
by bgriggs
Here is a video of the Radiator shoe base plate, dust collection shoe. I used Radiator brushes for the bristles and hinges to make bit changes easy. If folks are interested I can post the file somewhere else on the forum.

http://youtu.be/6qOy9DFSdyo

Bill

Re: YouTube Videos - Show us what you are cutting

PostPosted: Mon Jan 09, 2012 4:15 am
by bgriggs
Here is the first test I did with the Radiator Shoe dust collection boot. I sprinkled some saw dust around the table and checked what it picked up.

http://youtu.be/qEm7vmaJNM0


Bill

Re: YouTube Videos - Show us what you are cutting

PostPosted: Thu Jan 12, 2012 9:52 pm
by Robert58

Re: YouTube Videos - Show us what you are cutting

PostPosted: Tue Jan 17, 2012 4:37 am
by Dan.H.

Re: YouTube Videos - Show us what you are cutting

PostPosted: Tue Jan 17, 2012 5:59 am
by Mogal
Gotta love the home build machines!
You got a few more horse power then I have on mine :cry:

Here is a 'Live, Love, Laugh' I made for my daughter

I decided to time lapse it with the ipod.
(for whatever reason, the ipod mirrored the image!!!!)

http://youtu.be/unJuzCDHCTQ

And here is the virtual cutout of my 'Specialty Bolts' :D
http://youtu.be/DJ6q_NrWtH4

Re: YouTube Videos - Show us what you are cutting

PostPosted: Wed Jan 18, 2012 5:46 am
by Dan.H.
That is so neat...now you have to make the tools to use them...hehe...

Re: YouTube Videos - Show us what you are cutting

PostPosted: Tue Jun 12, 2012 8:08 am
by backyard_cnc
heres a video I did some time back. Keep meaning to do more but nver seem to get to it!

enjoy

gerald

http://www.youtube.com/watch?v=a8UWA2LWW4Q

Re: YouTube Videos - Show us what you are cutting

PostPosted: Mon Apr 28, 2014 12:33 am
by TReischl
Making a small Bombe' box

https://www.youtube.com/watch?v=GNtroI2zF0o

you can also see more videos on my site.

Re: YouTube Videos - Show us what you are cutting

PostPosted: Mon Apr 28, 2014 6:17 am
by scancad
Just to show what we do with our Pro Carv CNC

https://www.youtube.com/watch?v=9TqVGfcKwTk

Re: YouTube Videos - Show us what you are cutting

PostPosted: Tue Aug 12, 2014 11:10 am
by Erniewood
Wooden Gear Clocks
Here is a link to my you tube video of a wooden gear clock cut with VCarve Pro
https://www.youtube.com/watch?v=h0FJnSiRK4Y
You can also check out a few more of my clocks.
No cnc footage but if anyone is interested I could upload some to youtube