A little video of my attempt at turning a fractal into something that looks like a chip carving. Lots and lots of hours in vcarve resizing and moving groups of vectors around. Machined in mahogany which seems to hold up to those pockets right next to each other across the grain pretty well.
Re: YouTube Videos - Show us what you are cutting
Posted: Thu Sep 22, 2011 11:08 pm
by pben
Here's a clip from my workshop:
I'm routing the outlines and soundhole of a concert guitar soundboard. The workpiece is held with vacuum and the white vacuum board is made out of high pressure laminate (similar to Formica, only 1/2" thick). It works like a dream...
Regards
Peter
Re: YouTube Videos - Show us what you are cutting
Posted: Sat Jan 07, 2012 3:36 am
by JohnJackson
Here is a video of VCarving a corporate logo into a mahogany door panel. Cross posted from another message.
Thanks,
John Jackson
Russell ON
Re: YouTube Videos - Show us what you are cutting
Posted: Mon Jan 09, 2012 12:55 am
by bgriggs
Hee is a video of cutting a Boy Scout Emblem that I designed in Aspire.
Bill
Re: YouTube Videos - Show us what you are cutting
Posted: Mon Jan 09, 2012 4:11 am
by bgriggs
Here is a video of the Radiator shoe base plate, dust collection shoe. I used Radiator brushes for the bristles and hinges to make bit changes easy. If folks are interested I can post the file somewhere else on the forum.
Bill
Re: YouTube Videos - Show us what you are cutting
Posted: Mon Jan 09, 2012 4:15 am
by bgriggs
Here is the first test I did with the Radiator Shoe dust collection boot. I sprinkled some saw dust around the table and checked what it picked up.
Bill
Re: YouTube Videos - Show us what you are cutting
Posted: Thu Jan 12, 2012 9:52 pm
by Robert58
Here are some videos I made, using my Camaster.
Most are 2-D work using Aspire.
Re: YouTube Videos - Show us what you are cutting
Posted: Tue Jan 17, 2012 4:37 am
by Dan.H.
My home made Machine.
Re: YouTube Videos - Show us what you are cutting
Posted: Tue Jan 17, 2012 5:59 am
by Mogal
Gotta love the home build machines!
You got a few more horse power then I have on mine
Here is a 'Live, Love, Laugh' I made for my daughter
I decided to time lapse it with the ipod.
(for whatever reason, the ipod mirrored the image!!!!)
And here is the virtual cutout of my 'Specialty Bolts'
Re: YouTube Videos - Show us what you are cutting
Posted: Wed Jan 18, 2012 5:46 am
by Dan.H.
That is so neat...now you have to make the tools to use them...hehe...
Re: YouTube Videos - Show us what you are cutting
Posted: Tue Jun 12, 2012 8:08 am
by backyard_cnc
heres a video I did some time back. Keep meaning to do more but nver seem to get to it!
Wooden Gear Clocks
Here is a link to my you tube video of a wooden gear clock cut with VCarve Pro
You can also check out a few more of my clocks.
No cnc footage but if anyone is interested I could upload some to youtube