Vectric Customer

Here is a new one, first real project on the behemoth. To bad is was 7"x 5.5"

http://www.youtube.com/watch?v=RCGucPF3Ho8

A little video of my attempt at turning a fractal into something that looks like a chip carving. Lots and lots of hours in vcarve resizing and moving groups of vectors around. Machined in mahogany which seems to hold up to those pockets right next to each other across the grain pretty well.

Here's a clip from my workshop:

I'm routing the outlines and soundhole of a concert guitar soundboard. The workpiece is held with vacuum and the white vacuum board is made out of high pressure laminate (similar to Formica, only 1/2" thick). It works like a dream...

Regards
Peter

Here is a video of VCarving a corporate logo into a mahogany door panel. Cross posted from another message.



Thanks,

John Jackson
Russell ON

Hee is a video of cutting a Boy Scout Emblem that I designed in Aspire.



Bill

Here is a video of the Radiator shoe base plate, dust collection shoe. I used Radiator brushes for the bristles and hinges to make bit changes easy. If folks are interested I can post the file somewhere else on the forum.



Bill

Here is the first test I did with the Radiator Shoe dust collection boot. I sprinkled some saw dust around the table and checked what it picked up.




Bill

Here are some videos I made, using my Camaster.








Most are 2-D work using Aspire.

My home made Machine.

Gotta love the home build machines!
You got a few more horse power then I have on mine

Here is a 'Live, Love, Laugh' I made for my daughter

I decided to time lapse it with the ipod.
(for whatever reason, the ipod mirrored the image!!!!)



And here is the virtual cutout of my 'Specialty Bolts'

That is so neat...now you have to make the tools to use them...hehe...

heres a video I did some time back. Keep meaning to do more but nver seem to get to it!

enjoy

gerald

Making a small Bombe' box

https://www.youtube.com/watch?v=GNtroI2zF0o

you can also see more videos on my site.

Just to show what we do with our Pro Carv CNC

Wooden Gear Clocks
Here is a link to my you tube video of a wooden gear clock cut with VCarve Pro

You can also check out a few more of my clocks.
No cnc footage but if anyone is interested I could upload some to youtube