YouTube Videos - Show us what you are cutting
Re: YouTube Videos - Show us what you are cutting
Here is a new one, first real project on the behemoth. To bad is was 7"x 5.5"
Re: YouTube Videos - Show us what you are cutting
http://www.youtube.com/watch?v=RCGucPF3Ho8
A little video of my attempt at turning a fractal into something that looks like a chip carving. Lots and lots of hours in vcarve resizing and moving groups of vectors around. Machined in mahogany which seems to hold up to those pockets right next to each other across the grain pretty well.
A little video of my attempt at turning a fractal into something that looks like a chip carving. Lots and lots of hours in vcarve resizing and moving groups of vectors around. Machined in mahogany which seems to hold up to those pockets right next to each other across the grain pretty well.
-
- Posts: 5
- Joined: Sat Nov 13, 2010 7:24 pm
- Model of CNC Machine: Victor 900VF
- Location: Sölvesborg, SWEDEN
Re: YouTube Videos - Show us what you are cutting
Here's a clip from my workshop:
I'm routing the outlines and soundhole of a concert guitar soundboard. The workpiece is held with vacuum and the white vacuum board is made out of high pressure laminate (similar to Formica, only 1/2" thick). It works like a dream...
Regards
Peter
I'm routing the outlines and soundhole of a concert guitar soundboard. The workpiece is held with vacuum and the white vacuum board is made out of high pressure laminate (similar to Formica, only 1/2" thick). It works like a dream...
Regards
Peter
-
- Posts: 33
- Joined: Mon Aug 09, 2010 1:31 am
- Model of CNC Machine: Magnum Phoenix, New Hermes 1219
- Location: Russell, Ontario
- Contact:
Re: YouTube Videos - Show us what you are cutting
Here is a video of VCarving a corporate logo into a mahogany door panel. Cross posted from another message.
Thanks,
John Jackson
Russell ON
Thanks,
John Jackson
Russell ON
- bgriggs
- Vectric Wizard
- Posts: 306
- Joined: Sat Aug 20, 2005 2:29 pm
- Model of CNC Machine: Warp Drive Project R&P
- Location: Canastota NY
- Contact:
Re: YouTube Videos - Show us what you are cutting
Hee is a video of cutting a Boy Scout Emblem that I designed in Aspire.
Bill
Bill
Aspire, Cut3D, WarpDrive R&P, Lathe/Mill, Laser, foam cutter makermasters.com @BillGriggs
- bgriggs
- Vectric Wizard
- Posts: 306
- Joined: Sat Aug 20, 2005 2:29 pm
- Model of CNC Machine: Warp Drive Project R&P
- Location: Canastota NY
- Contact:
Re: YouTube Videos - Show us what you are cutting
Here is a video of the Radiator shoe base plate, dust collection shoe. I used Radiator brushes for the bristles and hinges to make bit changes easy. If folks are interested I can post the file somewhere else on the forum.
Bill
Bill
Aspire, Cut3D, WarpDrive R&P, Lathe/Mill, Laser, foam cutter makermasters.com @BillGriggs
- bgriggs
- Vectric Wizard
- Posts: 306
- Joined: Sat Aug 20, 2005 2:29 pm
- Model of CNC Machine: Warp Drive Project R&P
- Location: Canastota NY
- Contact:
Re: YouTube Videos - Show us what you are cutting
Here is the first test I did with the Radiator Shoe dust collection boot. I sprinkled some saw dust around the table and checked what it picked up.
Bill
Bill
Aspire, Cut3D, WarpDrive R&P, Lathe/Mill, Laser, foam cutter makermasters.com @BillGriggs
Re: YouTube Videos - Show us what you are cutting
Here are some videos I made, using my Camaster.
Most are 2-D work using Aspire.
Most are 2-D work using Aspire.
-
- Vectric Craftsman
- Posts: 103
- Joined: Sat Aug 13, 2005 6:54 am
- Model of CNC Machine: 1325 Intech and 6090 Intech
- Location: Northern B.C. Canada
- Contact:
Re: YouTube Videos - Show us what you are cutting
My home made Machine.
- Mogal
- Vectric Craftsman
- Posts: 238
- Joined: Wed Oct 13, 2010 5:28 pm
- Model of CNC Machine: DIY CNC
- Location: Victoria, BC
- Contact:
Re: YouTube Videos - Show us what you are cutting
Gotta love the home build machines!
You got a few more horse power then I have on mine
Here is a 'Live, Love, Laugh' I made for my daughter
I decided to time lapse it with the ipod.
(for whatever reason, the ipod mirrored the image!!!!)
And here is the virtual cutout of my 'Specialty Bolts'
You got a few more horse power then I have on mine
Here is a 'Live, Love, Laugh' I made for my daughter
I decided to time lapse it with the ipod.
(for whatever reason, the ipod mirrored the image!!!!)
And here is the virtual cutout of my 'Specialty Bolts'
-
- Vectric Craftsman
- Posts: 103
- Joined: Sat Aug 13, 2005 6:54 am
- Model of CNC Machine: 1325 Intech and 6090 Intech
- Location: Northern B.C. Canada
- Contact:
Re: YouTube Videos - Show us what you are cutting
That is so neat...now you have to make the tools to use them...hehe...
- backyard_cnc
- Vectric Craftsman
- Posts: 237
- Joined: Mon Aug 31, 2009 4:41 am
- Model of CNC Machine: SHOPBOT, LIGHTMACHINES MILL, AJAXCNC-KNE
- Location: winnipeg, manitoba, Canada
Re: YouTube Videos - Show us what you are cutting
heres a video I did some time back. Keep meaning to do more but nver seem to get to it!
enjoy
gerald
enjoy
gerald
- TReischl
- Vectric Wizard
- Posts: 4653
- Joined: Thu Jan 18, 2007 6:04 pm
- Model of CNC Machine: 8020 48X36X7 RP 2022 UCCNC Screenset
- Location: Leland NC
Re: YouTube Videos - Show us what you are cutting
Making a small Bombe' box
https://www.youtube.com/watch?v=GNtroI2zF0o
you can also see more videos on my site.
https://www.youtube.com/watch?v=GNtroI2zF0o
you can also see more videos on my site.
"If you see a good fight, get in it." Dr. Vernon Johns
-
- Posts: 18
- Joined: Tue Aug 31, 2010 7:41 am
- Model of CNC Machine: Pro Carv
- Location: UK
- Contact:
Re: YouTube Videos - Show us what you are cutting
Just to show what we do with our Pro Carv CNC
-
- Posts: 2
- Joined: Mon Aug 22, 2011 11:27 am
- Model of CNC Machine: SHARK PRO PLUS
- Location: Warragul,Victoria,Australia
Re: YouTube Videos - Show us what you are cutting
Wooden Gear Clocks
Here is a link to my you tube video of a wooden gear clock cut with VCarve Pro
You can also check out a few more of my clocks.
No cnc footage but if anyone is interested I could upload some to youtube
Here is a link to my you tube video of a wooden gear clock cut with VCarve Pro
You can also check out a few more of my clocks.
No cnc footage but if anyone is interested I could upload some to youtube