Cat Exercise Wheel (Large Hamster Wheel)

An area to upload images of pieces cut using VCarve Pro

Cat Exercise Wheel (Large Hamster Wheel)

Postby sharkcutup » Thu Sep 05, 2019 9:37 pm

Optimized-Cat Exercise Wheel 8.jpg

Displays in correct orientation when clicked on. (Not exactly sure why it displays it here 90 degrees off)

I cut this and built it within the last three days using my CNC for the critical parts and a table saw and miter saw for the balance of parts. Stands 46" tall, 12" deep walkway on wheel (Roller base is 19.25" deep x 34" wide.

Plan on Lining the walkway with some carpet for the masonite board is a little slippery even for a cat with nails!!!

Sharkcutup
Facebook: Hogan's CNC Crafts
Website: www.hoganscnccrafts.com
V-Carve Pro 9.518
sharkcutup
Vectric Wizard
 
Posts: 371
Joined: Sat Mar 26, 2016 3:48 pm
Model of CNC Machine: Shark HD3 Pro Extended Bed with Spindle

Re: Cat Exercise Wheel (Large Hamster Wheel)

Postby gkas » Thu Sep 05, 2019 10:06 pm

Do you expect a cat to run on a wheel? :shock:
User avatar
gkas
Vectric Wizard
 
Posts: 451
Joined: Sun Jan 01, 2017 3:39 am
Location: Southern California
Model of CNC Machine: Aspire, Axiom AR8 Pro+, Axiom 4.2W Laser

Re: Cat Exercise Wheel (Large Hamster Wheel)

Postby TReischl » Thu Sep 05, 2019 10:39 pm

gkas wrote:Do you expect a cat to run on a wheel? :shock:


Oh, that is easy, just get a mouse to run on it first.
"If you see a good fight, get in it." Dr. Vernon Jones
User avatar
TReischl
Vectric Wizard
 
Posts: 2863
Joined: Thu Jan 18, 2007 6:04 pm
Location: Leland NC
Model of CNC Machine: 8020 Build 48X36X10 RP 2010 Screenset

Re: Cat Exercise Wheel (Large Hamster Wheel)

Postby highpockets » Fri Sep 06, 2019 12:38 am

John
Maker of Chips
User avatar
highpockets
Vectric Wizard
 
Posts: 2400
Joined: Tue Jan 06, 2015 4:04 pm
Model of CNC Machine: PDJ Pilot Pro

Re: Cat Exercise Wheel (Large Hamster Wheel)

Postby gkas » Fri Sep 06, 2019 1:15 am

gkas wrote:Do you expect a cat to run on a wheel? :shock:


OK... I'm thoroughly chastised.. :oops: :oops: ...I didn't know that a cat could get that bored :D :D
User avatar
gkas
Vectric Wizard
 
Posts: 451
Joined: Sun Jan 01, 2017 3:39 am
Location: Southern California
Model of CNC Machine: Aspire, Axiom AR8 Pro+, Axiom 4.2W Laser


Return to VCarve - Gallery

Who is online

Users browsing this forum: No registered users and 7 guests