bootjack

An area to upload images of pieces cut using VCarve Pro

bootjack

Postby sawmiller » Sun Aug 25, 2019 12:07 am

i needed a bootjack, so i made this file.
instructions are included.
bootjack.crv
(725.5 KiB) Downloaded 120 times
woodmizer sawmill and joe's hybrid cnc, a good combination
In the heart of Tn
User avatar
sawmiller
Vectric Wizard
 
Posts: 468
Joined: Sat May 03, 2008 8:34 pm
Location: camden,tn
Model of CNC Machine: joe's rack and pinion hybrid

Re: bootjack

Postby Bob Reda » Sun Aug 25, 2019 5:40 am

Thank you, these things come in handy!

Bob
Bob Reda
Vectric Wizard
 
Posts: 712
Joined: Wed Aug 16, 2006 7:34 pm
Location: Monessen, Pa
Model of CNC Machine: shopbot 48x48 upgraded prt

Re: bootjack

Postby ezurick » Sun Aug 25, 2019 8:40 am

sawmiller wrote:i needed a bootjack, so i made this file.
instructions are included.
bootjack.crv



Sorry to be naive, but what is a bootjack?
User avatar
ezurick
Vectric Craftsman
 
Posts: 253
Joined: Sat Oct 20, 2018 1:27 pm
Model of CNC Machine: Chinese 6040

Re: bootjack

Postby Savannahdan » Sun Aug 25, 2019 11:26 am

Excellent timing. I've needed to make one of these to get my work boots off. Thank you for the plan.
Savannahdan
Vectric Craftsman
 
Posts: 274
Joined: Sun May 03, 2015 12:25 pm
Location: Savannah, GA
Model of CNC Machine: Axiom AR8

Re: bootjack

Postby SteveNelson46 » Sun Aug 25, 2019 5:08 pm

ezurick wrote:
sawmiller wrote:i needed a bootjack, so i made this file.
instructions are included.
bootjack.crv



Sorry to be naive, but what is a bootjack?


https://www.youtube.com/watch?v=_E8Nxl-sTko
Steve
User avatar
SteveNelson46
Vectric Wizard
 
Posts: 543
Joined: Wed Jan 04, 2012 2:43 pm
Location: Tucson, Az.
Model of CNC Machine: Camaster Stinger with Recoil Lathe

Re: bootjack

Postby highpockets » Sun Aug 25, 2019 10:47 pm

Thanks for sharing....
John
Maker of Chips
User avatar
highpockets
Vectric Wizard
 
Posts: 2410
Joined: Tue Jan 06, 2015 4:04 pm
Model of CNC Machine: PDJ Pilot Pro

Re: bootjack

Postby sawmiller » Mon Aug 26, 2019 2:17 am

You step on a bootjack with one foot and catch the back of your other boot in its crotch, allows handless removal of boots, usually dirty..
The nice thing is if you just do the profile cut, it takes 2 min and 40 seconds to cut it out with a smooth finish to the cut using last pass.
Im not that fast on the bandsaw, and then having to remove marks.
Good for scraps as gifts
woodmizer sawmill and joe's hybrid cnc, a good combination
In the heart of Tn
User avatar
sawmiller
Vectric Wizard
 
Posts: 468
Joined: Sat May 03, 2008 8:34 pm
Location: camden,tn
Model of CNC Machine: joe's rack and pinion hybrid

Re: bootjack

Postby ezurick » Mon Aug 26, 2019 6:17 am

Thanks for explaining and showing me what a bootstrap is. I guess I knew, but wasn't sure. I don't wear boots like that, so I guess that is also why I was unsure.
User avatar
ezurick
Vectric Craftsman
 
Posts: 253
Joined: Sat Oct 20, 2018 1:27 pm
Model of CNC Machine: Chinese 6040

Re: bootjack

Postby WNC_Ed » Mon Aug 26, 2019 11:42 pm

Downloaded - thank you.
on my list of "tings to do".
Thank you again.
Maker of sawdust
User avatar
WNC_Ed
Vectric Craftsman
 
Posts: 228
Joined: Fri Dec 07, 2018 5:56 pm
Location: Western North Carolina - Heart of the Smokies
Model of CNC Machine: Shark HD4 AXYZ 4010

Re: bootjack

Postby sawmiller » Tue Aug 27, 2019 1:10 am

20190826_125254.jpg

From scraps
woodmizer sawmill and joe's hybrid cnc, a good combination
In the heart of Tn
User avatar
sawmiller
Vectric Wizard
 
Posts: 468
Joined: Sat May 03, 2008 8:34 pm
Location: camden,tn
Model of CNC Machine: joe's rack and pinion hybrid

Re: bootjack

Postby sharkcutup » Fri Aug 30, 2019 12:14 am

Downloaded and Changed the Font to a HAYMAKER font style (downloaded previously not part of the V-Carve font library) which is a more western style look for when I get around to making mine.

Great Idea and Thank you for Sharing!

Sharkcutup
Facebook: Hogan's CNC Crafts
Website: www.hoganscnccrafts.com
V-Carve Pro 9.518
sharkcutup
Vectric Wizard
 
Posts: 371
Joined: Sat Mar 26, 2016 3:48 pm
Model of CNC Machine: Shark HD3 Pro Extended Bed with Spindle


Return to VCarve - Gallery

Who is online

Users browsing this forum: Roly and 4 guests