Page 1 of 1
Quick project for a friend
Posted: Sun Jul 21, 2019 12:00 am
by Rcnewcomb
In poplar, measures about 8x18. I used a 120 degree V bit for the bevel and cut it out with a 0.25" end mill. The type face is Celtic Garamond. Machine time was just under 7 minute.
Re: Quick project for a friend
Posted: Sun Jul 21, 2019 2:34 am
by gkas
Nice look. Different.
Re: Quick project for a friend
Posted: Sun Jul 21, 2019 12:24 pm
by scottp55
The 120* chamfer goes very well with the font Randall!
Pleasing look!
scott