Quick project for a friend

An area to upload images of pieces cut using VCarve Pro

Quick project for a friend

Postby Rcnewcomb » Sun Jul 21, 2019 12:00 am

In poplar, measures about 8x18. I used a 120 degree V bit for the bevel and cut it out with a 0.25" end mill. The type face is Celtic Garamond. Machine time was just under 7 minute.
- Randall Newcomb
User avatar
Vectric Wizard
Posts: 3659
Joined: Fri Nov 04, 2005 5:54 am
Location: San Jose, California, USA
Model of CNC Machine: GCnC/WinCNC

Re: Quick project for a friend

Postby gkas » Sun Jul 21, 2019 2:34 am

Nice look. Different.
User avatar
Vectric Wizard
Posts: 599
Joined: Sun Jan 01, 2017 3:39 am
Location: Southern California
Model of CNC Machine: Aspire, Axiom AR8 Pro+, Axiom 4.2W Laser

Re: Quick project for a friend

Postby scottp55 » Sun Jul 21, 2019 12:24 pm

The 120* chamfer goes very well with the font Randall!
Pleasing look! :)
"One accurate measurement is worth a thousand expert opinions"


User avatar
Vectric Wizard
Posts: 3279
Joined: Thu May 09, 2013 11:30 am
Location: Kennebunkport, Maine, US
Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP10

Return to VCarve - Gallery

Who is online

Users browsing this forum: No registered users and 7 guests