Quick project for a friend

An area to upload images of pieces cut using VCarve Pro

Quick project for a friend

Postby Rcnewcomb » Sun Jul 21, 2019 12:00 am

In poplar, measures about 8x18. I used a 120 degree V bit for the bevel and cut it out with a 0.25" end mill. The type face is Celtic Garamond. Machine time was just under 7 minute.
EveIMG_1278.jpg
- Randall Newcomb
User avatar
Rcnewcomb
Vectric Wizard
 
Posts: 3549
Joined: Fri Nov 04, 2005 5:54 am
Location: San Jose, California, USA
Model of CNC Machine: GCnC/WinCNC

Re: Quick project for a friend

Postby gkas » Sun Jul 21, 2019 2:34 am

Nice look. Different.
User avatar
gkas
Vectric Wizard
 
Posts: 456
Joined: Sun Jan 01, 2017 3:39 am
Location: Southern California
Model of CNC Machine: Aspire, Axiom AR8 Pro+, Axiom 4.2W Laser

Re: Quick project for a friend

Postby scottp55 » Sun Jul 21, 2019 12:24 pm

The 120* chamfer goes very well with the font Randall!
Pleasing look! :)
scott
scott
User avatar
scottp55
Vectric Wizard
 
Posts: 3063
Joined: Thu May 09, 2013 11:30 am
Location: Kennebunkport, Maine, US
Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP10


Return to VCarve - Gallery

Who is online

Users browsing this forum: No registered users and 9 guests