Quadropod

An area to upload images of pieces cut using VCarve Pro

Quadropod

Postby Tailmaker » Sun Jun 09, 2019 12:53 am

Another more practical project in 3/4" phenolic clad Baltic Birch plywood. Well, you can call it a gadget.

Folded up for storing, 2 parts held together with strong magnets:
DSC01635.JPG


Separated and legs folded out:
DSC01637.JPG


Assembled and locked:
DSC01638.JPG


Ahh, that is the purpose.....
DSC01639.JPG


I had ordered a ready made tripod from the manufacturer and it was a sturdy piece of sheet metal design but a pain to assemble/disassemble and taking a lot of space.
As a four legged stool this design will tend to rock more than the tripod but the legs are pretensioned and don't move easily. It is also more tip-resistant than a tripod. I guess I will need a plastic sheet under the feet to avoid soaking the legs on muddy ground but a generous coat of tung oil should take care of some rain.

So this project is another proof what a few hours design and CNC work can do.
Tailmaker
Vectric Apprentice
 
Posts: 239
Joined: Sun Jun 16, 2013 4:40 am
Location: Pasadena, CA
Model of CNC Machine: Home Built 4-axis Router

Re: Quadropod

Postby scottp55 » Sun Jun 09, 2019 1:20 am

Hmmm....Nothing to do with compact storage to go gallivanting around the country in an RV G? :) :)
NICE JOB:)
scott
scott
User avatar
scottp55
Vectric Wizard
 
Posts: 3055
Joined: Thu May 09, 2013 11:30 am
Location: Kennebunkport, Maine, US
Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP10

Re: Quadropod

Postby TReischl » Sun Jun 09, 2019 1:16 pm

Nice job!

A neat trick to keep wood from soaking up ground moisture is to cut a couple of small pieces of old plastic cutting board and fasten them to the bottom of the legs. What also works is small pieces of wood with the grain running parallel to the ground. Those little pieces will eventually get ruined but the legs will be fine. I did this on some outdoor benches I made years ago, like 20 years ago. I have replaced the pads twice in that time but the bench legs are still in perfect condition.
"If you see a good fight, get in it." Dr. Vernon Jones
User avatar
TReischl
Vectric Wizard
 
Posts: 2863
Joined: Thu Jan 18, 2007 6:04 pm
Location: Leland NC
Model of CNC Machine: 8020 Build 48X36X10 RP 2010 Screenset

Re: Quadropod

Postby jib2 » Wed Jun 12, 2019 1:51 pm

That is absolutely awesome! Great Job. I can see a larger portable camping table for the table top grill as well.
jib2
Vectric Apprentice
 
Posts: 62
Joined: Mon Nov 03, 2014 12:46 am
Model of CNC Machine: Laguna CNC


Return to VCarve - Gallery

Who is online

Users browsing this forum: Google [Bot] and 8 guests