Keepsake Box

An area to upload images of pieces cut using VCarve Pro
Post Reply
User avatar
Aussie
Vectric Wizard
Posts: 563
Joined: Fri Nov 30, 2018 1:44 am
Model of CNC Machine: Robotics Model 8
Location: Adelaide Australia

Keepsake Box

Post by Aussie »

This is my first top using a D&M dish... lots to learn.
First attachment as well...hope I did it correctly
Attachments
box1.jpg
Box2.jpg
Ron
Crafers Crafts

User avatar
Aussie
Vectric Wizard
Posts: 563
Joined: Fri Nov 30, 2018 1:44 am
Model of CNC Machine: Robotics Model 8
Location: Adelaide Australia

Re: Keepsake Box

Post by Aussie »

ok I did something wrong...why are my attached images inverted???
Ron
Crafers Crafts

MTSO
Vectric Craftsman
Posts: 260
Joined: Tue Mar 11, 2014 6:12 pm
Model of CNC Machine: salecnc XJ1224
Location: Auckland New Zealand

Re: Keepsake Box

Post by MTSO »

There upside down because your from down under!.........same thing happened to me apple IPhone is it.

don't worry, nice box though. What it the wood that you used?.

regards

Brian

User avatar
Aussie
Vectric Wizard
Posts: 563
Joined: Fri Nov 30, 2018 1:44 am
Model of CNC Machine: Robotics Model 8
Location: Adelaide Australia

Re: Keepsake Box

Post by Aussie »

MTSO wrote:There upside down because your from down under!.........same thing happened to me apple IPhone is it.

don't worry, nice box though. What it the wood that you used?.

regards

Brian
Haha very funny.... but we are from the future.
Top is Red Oak sides are Merbau Decking timber
Ron
Crafers Crafts

User avatar
WNC_Ed
Vectric Craftsman
Posts: 296
Joined: Fri Dec 07, 2018 5:56 pm
Model of CNC Machine: Shark HD4 AXYZ 4010
Location: Western North Carolina - Heart of the Smokies

Re: Keepsake Box

Post by WNC_Ed »

Very nice!
Truly a keepsake.
Congrats
Maker of sawdust

User avatar
Aussie
Vectric Wizard
Posts: 563
Joined: Fri Nov 30, 2018 1:44 am
Model of CNC Machine: Robotics Model 8
Location: Adelaide Australia

Re: Keepsake Box

Post by Aussie »

WNC_Ed wrote:Very nice!
Truly a keepsake.
Congrats
Thank you
The next box will all be done on the CNC except the mitred edges for the trim... not sure how I could do the 45 degree joints on narrow stock...1/4" by 1/4"
Ron
Crafers Crafts

Post Reply