Layered Text

An area to upload images of pieces cut using VCarve Pro

Layered Text

Postby AdamB13 » Mon Feb 18, 2019 5:51 pm

I finally had a chance to try out the layered text that we covered at the Chicago Users Group meeting.
This is my first attempt but I am quite pleased with the results.
This was carved on an old piece of barn wood.
Attachments
20181228_165606.jpg
AdamB13
 
Posts: 7
Joined: Fri Sep 22, 2017 5:55 pm
Model of CNC Machine: New CNC SMART 5 x 10

Re: Layered Text

Postby highpockets » Mon Feb 18, 2019 9:46 pm

Think you got the hang of it... Looks good!

Thanks for sharing....
John
Maker of Chips
User avatar
highpockets
Vectric Wizard
 
Posts: 2843
Joined: Tue Jan 06, 2015 4:04 pm
Model of CNC Machine: PDJ Pilot Pro

Re: Layered Text

Postby AdamB13 » Mon Feb 18, 2019 9:52 pm

It took me a few tries with the offsetting and merging but I did what they said and made clean copies of the text so worst case I just deleted the bad text and made a new copy of it to work with.
Having the toolpath preview was also quite helpful in making sure it was correct before taking the plunge.
I made this to put up when we are camping. Just need to be careful that nobody decides they like it and walk off with it.
Most people that go camping are good people so shouldn't be a problem.
AdamB13
 
Posts: 7
Joined: Fri Sep 22, 2017 5:55 pm
Model of CNC Machine: New CNC SMART 5 x 10


Return to VCarve - Gallery

Who is online

Users browsing this forum: No registered users and 12 guests