A few Children's Plaques

An area to upload images of pieces cut using VCarve Pro

A few Children's Plaques

Postby Rcnewcomb » Sun Jan 20, 2019 11:18 pm

Just off the machine. Home Depot Poplar. There was some wood movement during the cutting since this is the rainy season in Northern California.

The heart-shaped one is just simple V-Carving.

The other two use a piece of clip art from Design & Make.
Attachments
miniAshra.jpg
miniGhosh.jpg
- Randall Newcomb
User avatar
Rcnewcomb
Vectric Wizard
 
Posts: 3548
Joined: Fri Nov 04, 2005 5:54 am
Location: San Jose, California, USA
Model of CNC Machine: GCnC/WinCNC

Re: A few Children's Plaques

Postby Savannahdan » Mon Jan 21, 2019 1:45 pm

Nice. Know what you mean about moisture and wood movement with our humid weather here in Southeast Georgia - although we're having colder temps at this time. Looking at those I also see that they could be made into boxes as well as plaques. Thank you for sharing.
Savannahdan
Vectric Craftsman
 
Posts: 275
Joined: Sun May 03, 2015 12:25 pm
Location: Savannah, GA
Model of CNC Machine: Axiom AR8

Re: A few Children's Plaques

Postby mtylerfl » Mon Jan 21, 2019 3:01 pm

Those are very nice, Randall!

Hey, Dan. It’s only 36 degrees this morning in Brunswick, GA. The wind makes it feel a LOT colder! I can’t wait for Spring and Summer!!

Well, at least my workshop is a comfy 76 degrees. Might spend most of the day there!
Michael Tyler

carvebuddy.com

facebook.com/carvebuddy

-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC
User avatar
mtylerfl
Vectric Wizard
 
Posts: 4029
Joined: Thu Jan 29, 2009 3:54 am
Location: Brunswick, GA
Model of CNC Machine: -CarveWright CNC -ShopBot Buddy PRSAlpha

Re: A few Children's Plaques

Postby Savannahdan » Mon Jan 21, 2019 3:09 pm

Michael, we're still sitting at around 33 degrees. I looked and Randall was at around 43 degrees at 6 this morning. My shop isn't fully finished and is still cold. I'm too cheap to buy a supplemental heater for it.
Savannahdan
Vectric Craftsman
 
Posts: 275
Joined: Sun May 03, 2015 12:25 pm
Location: Savannah, GA
Model of CNC Machine: Axiom AR8

Re: A few Children's Plaques

Postby Todd Bailey » Mon Feb 04, 2019 10:02 am

Always love the idea of plaques and gifts for new arrivals! Well done.

Really like both options. The raised VCarving is super nice... and the recessed blocks adds even more dimension!

Thanks, Randy for sharing!
------------------------------------
Todd Bailey | Design and Make
DesignAndMake.com
User avatar
Todd Bailey
Vectric Staff
 
Posts: 207
Joined: Mon Nov 24, 2014 8:40 pm
Model of CNC Machine: CraftCNC

Re: A few Children's Plaques

Postby Rcnewcomb » Thu Feb 07, 2019 4:03 am

Glazing in process:
IMG_0459 (1).jpg

IMG_0464.jpg
- Randall Newcomb
User avatar
Rcnewcomb
Vectric Wizard
 
Posts: 3548
Joined: Fri Nov 04, 2005 5:54 am
Location: San Jose, California, USA
Model of CNC Machine: GCnC/WinCNC

Re: A few Children's Plaques

Postby Todd Bailey » Thu Feb 07, 2019 9:20 am

Randy...

Looks good! Love that finish. Well Done.
------------------------------------
Todd Bailey | Design and Make
DesignAndMake.com
User avatar
Todd Bailey
Vectric Staff
 
Posts: 207
Joined: Mon Nov 24, 2014 8:40 pm
Model of CNC Machine: CraftCNC


Return to VCarve - Gallery

Who is online

Users browsing this forum: No registered users and 9 guests