This year for our good wishes, we have created a kirigami.
Some coloring, a word of good wishes and that's it.
the project
the instructions.
- paper a4 / 160gr orientation portrait
- x0y0 = left bottom
- z0 = table
- pass 1 : folds : set the drag knife spring to 6.5 (z=0 ; simple scratch of the paper)
- pass 2 : cut : set the drag knife to 9.0 (z=3)
- pass 3 : folds : return the page on long side, set the drag knife spring to 6.5 (z=0 ; simple scratch of the paper)
enjoy
A double-sided project with two passes to trace the folds and one pass to cut the reliefs, all with a drag knife.Kirigami of the NewYear with DragKnife
-
- Vectric Wizard
- Posts: 520
- Joined: Sun May 03, 2015 12:25 pm
- Model of CNC Machine: Axiom AR8
- Location: Savannah, GA
Re: Kirigami of the NewYear with DragKnife
Thank you for sharing. Excellent use of the dragknife.