christmas wreath

An area to upload images of pieces cut using VCarve Pro

christmas wreath

Postby tooldude » Wed Oct 17, 2018 12:09 pm

I am looking for a free Christmas wreath for V carve Pro
tooldude
 
Posts: 2
Joined: Fri Jan 05, 2018 5:04 pm
Model of CNC Machine: CNC SHARK HD4 Extended

Re: christmas wreath

Postby Rcnewcomb » Wed Oct 17, 2018 6:25 pm

Use your favorite search engine to look for
Christmas wreath coloring page svg
- Randall Newcomb
User avatar
Rcnewcomb
Vectric Wizard
 
Posts: 3548
Joined: Fri Nov 04, 2005 5:54 am
Location: San Jose, California, USA
Model of CNC Machine: GCnC/WinCNC

Re: christmas wreath

Postby Savannahdan » Wed Oct 17, 2018 7:01 pm

Even though you're looking for something "free", the Christmas Wreath on the Design & Make site is really nice. That's if you're looking for a 3d file. Otherwise, do as Randall suggests and do a search.
Savannahdan
Vectric Craftsman
 
Posts: 275
Joined: Sun May 03, 2015 12:25 pm
Location: Savannah, GA
Model of CNC Machine: Axiom AR8

Re: christmas wreath

Postby MTSO » Thu Oct 18, 2018 1:07 am

There is a Christmas wreath in the Vectric newsletter issue 24 November 2011, its for aspire version 3.5 so I'm not sure if the current v carve pro version can do it?.

regards

Brian
MTSO
Vectric Craftsman
 
Posts: 260
Joined: Tue Mar 11, 2014 6:12 pm
Location: Auckland New Zealand
Model of CNC Machine: salecnc XJ1224

Re: christmas wreath

Postby dhellew2 » Thu Oct 18, 2018 2:46 am

It should work fine... once saved in a later version you cannot go back to a prior version.
I opened it with v9.5
Dale
You will get old if you live long enough!

Dale
User avatar
dhellew2
Vectric Wizard
 
Posts: 1202
Joined: Thu May 22, 2008 10:14 pm
Location: Royal City Washington
Model of CNC Machine: Legacy Artisan 72

Re: christmas wreath

Postby Rcnewcomb » Thu Oct 18, 2018 2:50 am

its for aspire version 3.5 so I'm not sure if the current v carve pro

VCarve cannot open Aspire files.
- Randall Newcomb
User avatar
Rcnewcomb
Vectric Wizard
 
Posts: 3548
Joined: Fri Nov 04, 2005 5:54 am
Location: San Jose, California, USA
Model of CNC Machine: GCnC/WinCNC

Re: christmas wreath

Postby sharkcutup » Fri Oct 19, 2018 4:03 pm

Christmas Wreath.jpg


You could create something like this in V-Carve Pro or Desktop and then paint it.

Sharkcutup
Facebook: Hogan's CNC Crafts
Website: www.hoganscnccrafts.com
V-Carve Pro 9.518
sharkcutup
Vectric Wizard
 
Posts: 371
Joined: Sat Mar 26, 2016 3:48 pm
Model of CNC Machine: Shark HD3 Pro Extended Bed with Spindle

Re: christmas wreath

Postby garylmast » Fri Oct 19, 2018 4:59 pm

This is the one I did from the Nov 2011 free projects and hung it on my front door for Christmas. I guess I have to make another one. Somebody liked it better than I did and stole it. Great way to honor Christmas.

https://www.vectric.com/cool-stuff/proj ... reath.html
Attachments
Christmas Wreath47.jpg
garylmast
Vectric Wizard
 
Posts: 975
Joined: Fri Oct 23, 2009 4:03 pm
Location: Sandy, Utah

Re: christmas wreath

Postby mtylerfl » Fri Oct 19, 2018 8:35 pm

I don’t blame them for stealing it - you did a fantastic job! Not sure it would be worth time in the pokey if caught with the goods, though!
Michael Tyler

carvebuddy.com

facebook.com/carvebuddy

-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC
User avatar
mtylerfl
Vectric Wizard
 
Posts: 4029
Joined: Thu Jan 29, 2009 3:54 am
Location: Brunswick, GA
Model of CNC Machine: -CarveWright CNC -ShopBot Buddy PRSAlpha

Re: christmas wreath

Postby martin54 » Sat Oct 20, 2018 10:47 am

As has been pointed out the vectric one from 2011 is Aspire only, the OP is running Vcarve :lol:

This year you need to make a lockable polycarb display case to bolt on the door as well :lol: :lol:
Won't deter everyone but should eliminate the opportunists :lol: :lol: :lol:
User avatar
martin54
Vectric Wizard
 
Posts: 4629
Joined: Fri Nov 09, 2012 2:12 pm
Location: Crossgates, Scotland
Model of CNC Machine: Gerber System 48 (modified)

Re: christmas wreath

Postby sharkcutup » Sat Oct 20, 2018 2:11 pm

3D Wreath.jpg



Here is another wreath using 3D Clipart Bells supplied with VCarve


Sharkcutup
Facebook: Hogan's CNC Crafts
Website: www.hoganscnccrafts.com
V-Carve Pro 9.518
sharkcutup
Vectric Wizard
 
Posts: 371
Joined: Sat Mar 26, 2016 3:48 pm
Model of CNC Machine: Shark HD3 Pro Extended Bed with Spindle

Re: christmas wreath

Postby Daniel S » Sun Oct 21, 2018 12:56 am

Just to add my two cents. In 2014 I purchased a pattern from Judy Gale Roberts to be cut out with scroll saw, I'm not the best at that skill, so I converted the drawings to vectors and cut the parts out with my Shark ( old Shark Pro). Then with sanding and fitting I ended up with a wreath that my wife still enjoys today. I believe the price for the pattern was under 10 dollars.
Dan
Attachments
WreathJGR.JPG
Daniel S
Vectric Apprentice
 
Posts: 61
Joined: Thu Jan 08, 2009 6:24 am
Location: Orange, CA
Model of CNC Machine: Shark HD4

Re: christmas wreath

Postby mcsteve » Sun Oct 21, 2018 3:50 am

dhellew2 wrote:It should work fine... once saved in a later version you cannot go back to a prior version.
I opened it with v9.5
Dale


Dale. How did you open it with v9.5? Were you using V-Carve or Aspire?

Stephen
mcsteve
Vectric Apprentice
 
Posts: 12
Joined: Sat Jan 10, 2015 9:41 pm
Location: Ontario, Canada
Model of CNC Machine: Shark Pro HD


Return to VCarve - Gallery

Who is online

Users browsing this forum: No registered users and 5 guests