Yeah I know, nobody needs more little boxes. But I wanted to experiment with a different hinge design. I got really small metal hinges and a really small (2mm) router bit. There are slots cut with the 2mm bit that were just big enough for the wings of the hinges, and the hinge is glued into the slot. Then there's a bevel on the top of the base and the bottom of the lid so that the lid stands up when open. You can see what I mean in the pictures.
Design by Andy; cutting, gluing, sanding, and finishing by Marty
Side view showing bevel
Lid pattern created with vcarve and fluting toolpaths