Limestone V-Carve

An area to upload images of pieces cut using VCarve Pro
Post Reply
User avatar
Rcnewcomb
Vectric Archimage
Posts: 5886
Joined: Fri Nov 04, 2005 5:54 am
Model of CNC Machine: 24x36 GCnC/WinCNC with ATC
Location: San Jose, California, USA
Contact:

Limestone V-Carve

Post by Rcnewcomb »

This is just a basic V-carve with a Bosch 90 degree bit in Limestone. Feedrate was 15K RPM at 60IPM XY and 45 IPM Z. Took about 25 minutes to cut. The Marble Master is the name of the company that gave me the stone remnants, so I made this for them as a thank you gift.
IMG_3302.jpg
IMG_3311.jpg
IMG_3313.jpg
- Randall Newcomb
10 fingers in, 10 fingers out, another good day in the shop

User avatar
scottp55
Vectric Wizard
Posts: 4713
Joined: Thu May 09, 2013 11:30 am
Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP11.5
Location: Kennebunkport, Maine, US

Re: Limestone V-Carve

Post by scottp55 »

NICE clean cut Randall! :)
Like the layout also!
Well Done!
They should LOVE that! :D
scott
I've learned my lesson well. You can't please everyone,so you have to please yourself
R.N.

Bob Reda
Vectric Wizard
Posts: 858
Joined: Wed Aug 16, 2006 7:34 pm
Model of CNC Machine: shopbot 48x48 upgraded prt
Location: Monessen, Pa
Contact:

Re: Limestone V-Carve

Post by Bob Reda »

Nice

User avatar
dwilli9013
Vectric Wizard
Posts: 1237
Joined: Mon Sep 30, 2013 12:45 am
Model of CNC Machine: 3 axis Self Designed Self Built
Location: Machesney Park Illinois

Re: Limestone V-Carve

Post by dwilli9013 »

Very nice. Amazing how clean the cuts are. Thanks for sharing. :lol: :lol:
D-Dub
Dwayne
Dwilli

User avatar
Rcnewcomb
Vectric Archimage
Posts: 5886
Joined: Fri Nov 04, 2005 5:54 am
Model of CNC Machine: 24x36 GCnC/WinCNC with ATC
Location: San Jose, California, USA
Contact:

Re: Limestone V-Carve

Post by Rcnewcomb »

Short Video: ->YouTube Link
- Randall Newcomb
10 fingers in, 10 fingers out, another good day in the shop

Post Reply