Limestone V-Carve
- Rcnewcomb
- Vectric Archimage
- Posts: 5919
- Joined: Fri Nov 04, 2005 5:54 am
- Model of CNC Machine: 24x36 GCnC/WinCNC with ATC
- Location: San Jose, California, USA
- Contact:
Limestone V-Carve
This is just a basic V-carve with a Bosch 90 degree bit in Limestone. Feedrate was 15K RPM at 60IPM XY and 45 IPM Z. Took about 25 minutes to cut. The Marble Master is the name of the company that gave me the stone remnants, so I made this for them as a thank you gift.
- Randall Newcomb
10 fingers in, 10 fingers out, another good day in the shop
10 fingers in, 10 fingers out, another good day in the shop
- scottp55
- Vectric Wizard
- Posts: 4717
- Joined: Thu May 09, 2013 11:30 am
- Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP11.5
- Location: Kennebunkport, Maine, US
Re: Limestone V-Carve
NICE clean cut Randall!
Like the layout also!
Well Done!
They should LOVE that!
scott
Like the layout also!
Well Done!
They should LOVE that!
scott
I've learned my lesson well. You can't please everyone,so you have to please yourself
R.N.
R.N.
- dwilli9013
- Vectric Wizard
- Posts: 1237
- Joined: Mon Sep 30, 2013 12:45 am
- Model of CNC Machine: 3 axis Self Designed Self Built
- Location: Machesney Park Illinois
Re: Limestone V-Carve
Very nice. Amazing how clean the cuts are. Thanks for sharing.
D-Dub
Dwayne
Dwilli
Dwayne
Dwilli
- Rcnewcomb
- Vectric Archimage
- Posts: 5919
- Joined: Fri Nov 04, 2005 5:54 am
- Model of CNC Machine: 24x36 GCnC/WinCNC with ATC
- Location: San Jose, California, USA
- Contact:
Re: Limestone V-Carve
Short Video: ->YouTube Link
- Randall Newcomb
10 fingers in, 10 fingers out, another good day in the shop
10 fingers in, 10 fingers out, another good day in the shop