Sakura branch

An area to upload images of pieces cut using VCarve Pro
Post Reply
laflippin
Vectric Craftsman
Posts: 216
Joined: Tue Jun 12, 2018 3:07 pm
Model of CNC Machine: Axiom AR 8 Pro+
Location: Cambria, CA

Sakura branch

Post by laflippin »

A two-part inlay project using a reclaimed piece of 1x12 pine shelving...the petals are red oak, the twigs are walnut. Eventually I think I'll cut this project again but with maple instead of pine.
Attachments
sakura inlay.JPG

User avatar
Rcnewcomb
Vectric Archimage
Posts: 5887
Joined: Fri Nov 04, 2005 5:54 am
Model of CNC Machine: 24x36 GCnC/WinCNC with ATC
Location: San Jose, California, USA
Contact:

Re: Sakura branch

Post by Rcnewcomb »

Very nicely done.
- Randall Newcomb
10 fingers in, 10 fingers out, another good day in the shop

armbrusterco
Vectric Craftsman
Posts: 128
Joined: Tue Feb 14, 2012 5:26 am
Model of CNC Machine: Roland MDX-40A
Location: Lake Barrington, IL
Contact:

Re: Sakura branch

Post by armbrusterco »

Terrific work.
Bob Armbruster
www.ArmbrusterCo.com

User avatar
scottp55
Vectric Wizard
Posts: 4713
Joined: Thu May 09, 2013 11:30 am
Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP11.5
Location: Kennebunkport, Maine, US

Re: Sakura branch

Post by scottp55 »

LIKING it! :)
Great work!
scott
I've learned my lesson well. You can't please everyone,so you have to please yourself
R.N.

User avatar
dwilli9013
Vectric Wizard
Posts: 1237
Joined: Mon Sep 30, 2013 12:45 am
Model of CNC Machine: 3 axis Self Designed Self Built
Location: Machesney Park Illinois

Re: Sakura branch

Post by dwilli9013 »

Very Nice. :lol: :lol:
D-Dub
Dwayne
Dwilli

laflippin
Vectric Craftsman
Posts: 216
Joined: Tue Jun 12, 2018 3:07 pm
Model of CNC Machine: Axiom AR 8 Pro+
Location: Cambria, CA

Re: Sakura branch

Post by laflippin »

Thanks, folks--I've picked up so much great advice from reading through the v-carve inlay discussions on this forum! I can't thank y'all enough! This forum is one of the best I've ever seen, for any technical field.

Post Reply