I run a Amazon Handmade Store and sell at Eastern Market in Detroit(one of the oldest city run farmers markets in the country) I sell quite a few of these every week.
I take Reclaimed Cedar from Mid Michigan(8"x20" 1" thick) and using the shō sugi ban technique char the Cedar before dropping it on the CNC. Use the Vacuum table to hold the piece in place. cycle time is about 6min average. The look great indoors but are durable enough to withstand the outdoor environment.
I also use the same reclaimed Cedar and high quality acyrlic paints to great beautiful bursts of color to contrast the natural beauty of the wood grain of the Cedar.
V Carve Wall Art
-
- Vectric Apprentice
- Posts: 86
- Joined: Wed Feb 15, 2017 2:03 pm
- Model of CNC Machine: 2 SCM Routech Record 120s(1999, 2001)
- mtylerfl
- Vectric Archimage
- Posts: 5892
- Joined: Thu Jan 29, 2009 3:54 am
- Model of CNC Machine: -CarveWright CNC -ShopBot Buddy PRSAlpha
- Location: Brunswick, GA
Re: V Carve Wall Art
Excellent easy $$!
Michael Tyler
facebook.com/carvebuddy
-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC
facebook.com/carvebuddy
-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC
-
- Posts: 5
- Joined: Thu Jun 14, 2018 9:19 am
- Model of CNC Machine: WorkBee
Re: V Carve Wall Art
very nice and gives me ideas! lol Thanks for sharing
- dwilli9013
- Vectric Wizard
- Posts: 1237
- Joined: Mon Sep 30, 2013 12:45 am
- Model of CNC Machine: 3 axis Self Designed Self Built
- Location: Machesney Park Illinois
Re: V Carve Wall Art
Wish I could see the pictures. Thats been happening as of late just get a little broken picture icon. All else is fine.
D-Dub
Dwayne
Dwilli
Dwayne
Dwilli
-
- Vectric Apprentice
- Posts: 86
- Joined: Wed Feb 15, 2017 2:03 pm
- Model of CNC Machine: 2 SCM Routech Record 120s(1999, 2001)
Re: V Carve Wall Art
Likely you browsers issue not the forum, try a different one. https://imgur.com/a/xcE3bE4dwilli9013 wrote:Wish I could see the pictures. Thats been happening as of late just get a little broken picture icon. All else is fine.
- dwilli9013
- Vectric Wizard
- Posts: 1237
- Joined: Mon Sep 30, 2013 12:45 am
- Model of CNC Machine: 3 axis Self Designed Self Built
- Location: Machesney Park Illinois
Re: V Carve Wall Art
You are correct. View them on my phone it is fine. Browsers at work won't allow Imgur photos. Nice pieces by the way.potzmannwoodshop wrote:Likely you browsers issue not the forum, try a different one. https://imgur.com/a/xcE3bE4dwilli9013 wrote:Wish I could see the pictures. Thats been happening as of late just get a little broken picture icon. All else is fine.
D-Dub
Dwayne
Dwilli
Dwayne
Dwilli
-
- Vectric Apprentice
- Posts: 86
- Joined: Wed Feb 15, 2017 2:03 pm
- Model of CNC Machine: 2 SCM Routech Record 120s(1999, 2001)
Re: V Carve Wall Art
dwilli9013 wrote:You are correct. View them on my phone it is fine. Browsers at work won't allow Imgur photos. Nice pieces by the way.potzmannwoodshop wrote:Likely you browsers issue not the forum, try a different one. https://imgur.com/a/xcE3bE4dwilli9013 wrote:Wish I could see the pictures. Thats been happening as of late just get a little broken picture icon. All else is fine.
Thanks