STL file

An area to upload images of pieces cut using VCarve Pro
Post Reply
woody53
Vectric Wizard
Posts: 493
Joined: Sat Jun 11, 2011 3:27 pm
Model of CNC Machine: Probotix Meteor 25 x 50
Location: Jefferson City, Mo.

STL file

Post by woody53 »

last supper pic (2).jpg
Did this over the weekend and into yesterday. Took 24 1/2 hrs , seems like a lot but there is a lot of detail and the finish toolpath was done with a 1/32 tapered ballnose. Picture sure doesn't do it justice . Any suggestions for a good finish ?? Thanks for looking. Just off machine as is.

Dave

User avatar
Rcnewcomb
Vectric Archimage
Posts: 5887
Joined: Fri Nov 04, 2005 5:54 am
Model of CNC Machine: 24x36 GCnC/WinCNC with ATC
Location: San Jose, California, USA
Contact:

Re: STL file

Post by Rcnewcomb »

suggestions for a good finish?
I'd suggest doing a very light glaze with something like Minwax Honey Maple glaze, followed by a satin lacquer.
- Randall Newcomb
10 fingers in, 10 fingers out, another good day in the shop

woody53
Vectric Wizard
Posts: 493
Joined: Sat Jun 11, 2011 3:27 pm
Model of CNC Machine: Probotix Meteor 25 x 50
Location: Jefferson City, Mo.

Re: STL file

Post by woody53 »

last supper stained.jpg
Minwax Honey Maple sure made the detail Pop. Thanks Randall. Making frame now.

Dave

TheWoodForge
Posts: 5
Joined: Thu Jun 14, 2018 9:19 am
Model of CNC Machine: WorkBee

Re: STL file

Post by TheWoodForge »

Very nice work Dave, do you have a picture with the frame fully complete? Would be nice too see.

Darren

Post Reply