Recent Project - Luther’s Rose
Recent Project - Luther’s Rose
Made from 6/4 red oak, 23” in diameter. Made this for our church which is turning 150 years old this year. Model is from design and make. I am still amazed that carve is able to project the lettering onto a 3D model. Used a 1/2” 60degree v-bit for the lettering. Finish is a satin lacquer, sometimes gloss can make things look to much like plastic. Really wanted the wood to speak for itself.
Btw it took 11 hours of total machining time...
Btw it took 11 hours of total machining time...
- highpockets
- Vectric Wizard
- Posts: 3667
- Joined: Tue Jan 06, 2015 4:04 pm
- Model of CNC Machine: PDJ Pilot Pro
-
- Vectric Wizard
- Posts: 858
- Joined: Wed Aug 16, 2006 7:34 pm
- Model of CNC Machine: shopbot 48x48 upgraded prt
- Location: Monessen, Pa
- Contact:
Re: Recent Project - Luther’s Rose
very nice
Bob
Bob
- Rcnewcomb
- Vectric Archimage
- Posts: 5887
- Joined: Fri Nov 04, 2005 5:54 am
- Model of CNC Machine: 24x36 GCnC/WinCNC with ATC
- Location: San Jose, California, USA
- Contact:
Re: Recent Project - Luther’s Rose
Excellent choice on the satin finish - very elegant.
- Randall Newcomb
10 fingers in, 10 fingers out, another good day in the shop
10 fingers in, 10 fingers out, another good day in the shop
-
- Vectric Craftsman
- Posts: 216
- Joined: Sat Feb 03, 2018 2:03 am
- Model of CNC Machine: diy 4 X 4 CNC Router
- Location: So. Cal.
Re: Recent Project - Luther’s Rose
Nice work, Oak is my favorite wood.
Looks great.
mark-s
Looks great.
mark-s
- mtylerfl
- Vectric Archimage
- Posts: 5869
- Joined: Thu Jan 29, 2009 3:54 am
- Model of CNC Machine: -CarveWright CNC -ShopBot Buddy PRSAlpha
- Location: Brunswick, GA
Re: Recent Project - Luther’s Rose
That is gorgeous! Very nice work!
Michael Tyler
facebook.com/carvebuddy
-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC
facebook.com/carvebuddy
-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC
- Leo
- Vectric Wizard
- Posts: 4085
- Joined: Sat Jul 14, 2007 3:02 am
- Model of CNC Machine: 1300 x 1300 x 254 Chinese Made
- Location: East Freetown, Ma.
- Contact:
Re: Recent Project - Luther’s Rose
Beautiful Display.
It will be there in the church for generations
It will be there in the church for generations
Imagine the Possibilities of a Creative mind, combined with the functionality of CNC
Re: Recent Project - Luther’s Rose
amazing work
-
- Posts: 1
- Joined: Sat Oct 13, 2018 6:07 pm
- Model of CNC Machine: VCarve 9.0
Re: Recent Project - Luther’s Rose
Beautiful. Do you have a tap file you'd be willing to share? We're looking into making these for the Christmas Fundraiser here at Faith Lutheran.
Thanks.
email: drnancyalmodovar@gmail.com
www.lutherangirl.org
Nancy
Thanks.
email: drnancyalmodovar@gmail.com
www.lutherangirl.org
Nancy
-
- Vectric Apprentice
- Posts: 60
- Joined: Tue Mar 16, 2010 1:38 am
- Model of CNC Machine: MechMate
Re: Recent Project - Luther’s Rose
Nice work
-
- Vectric Wizard
- Posts: 526
- Joined: Thu May 14, 2015 12:23 am
- Model of CNC Machine: FLA Saturn 4x4 / 7W & 60W lasers
- Location: Bemidji, MN
- Contact:
Re: Recent Project - Luther’s Rose
Beautiful work! Can you tell me what font that is?
Dave
https://lakesedgewoodcraft.com/
https://lakesedgewoodcraft.com/