Recent Project - Luther’s Rose

An area to upload images of pieces cut using VCarve Pro

Recent Project - Luther’s Rose

Postby kminden » Mon Jul 09, 2018 3:04 am

Made from 6/4 red oak, 23” in diameter. Made this for our church which is turning 150 years old this year. Model is from design and make. I am still amazed that carve is able to project the lettering onto a 3D model. Used a 1/2” 60degree v-bit for the lettering. Finish is a satin lacquer, sometimes gloss can make things look to much like plastic. Really wanted the wood to speak for itself.
Btw it took 11 hours of total machining time...
Attachments
C20F1928-0FC1-452F-99CB-6D8371DD7D21.jpeg
BBD35D9A-FB35-4F9A-B31A-9740A277570C.jpeg
632556BD-D3FE-428E-A298-55D68519B765.jpeg
kminden
 
Posts: 22
Joined: Mon Dec 14, 2015 2:52 am
Model of CNC Machine: Homemade

Re: Recent Project - Luther’s Rose

Postby highpockets » Mon Jul 09, 2018 3:11 am

Beautiful!
John
Maker of Chips
User avatar
highpockets
Vectric Wizard
 
Posts: 1726
Joined: Tue Jan 06, 2015 4:04 pm
Model of CNC Machine: PDJ Pilot Pro

Re: Recent Project - Luther’s Rose

Postby Bob Reda » Mon Jul 09, 2018 3:49 am

very nice

Bob
Bob Reda
Vectric Wizard
 
Posts: 666
Joined: Wed Aug 16, 2006 7:34 pm
Location: Monessen, Pa
Model of CNC Machine: shopbot 48x48 upgraded prt

Re: Recent Project - Luther’s Rose

Postby Rcnewcomb » Mon Jul 09, 2018 4:50 am

Excellent choice on the satin finish - very elegant.
- Randall Newcomb
10 fingers in, 10 fingers out - another good day in the shop
User avatar
Rcnewcomb
Vectric Wizard
 
Posts: 3040
Joined: Fri Nov 04, 2005 5:54 am
Location: San Jose, California, USA
Model of CNC Machine: GCnC/WinCNC

Re: Recent Project - Luther’s Rose

Postby mark-s » Mon Jul 09, 2018 6:00 am

Nice work, Oak is my favorite wood.
Looks great.
mark-s
mark-s
Vectric Apprentice
 
Posts: 57
Joined: Sat Feb 03, 2018 2:03 am
Model of CNC Machine: diy cnc router

Re: Recent Project - Luther’s Rose

Postby mtylerfl » Mon Jul 09, 2018 1:17 pm

That is gorgeous! Very nice work!
Michael Tyler

carvebuddy.com

facebook.com/carvebuddy

-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC
User avatar
mtylerfl
Vectric Wizard
 
Posts: 3160
Joined: Thu Jan 29, 2009 3:54 am
Location: Brunswick, GA
Model of CNC Machine: -CarveWright CNC -ShopBot Buddy PRSAlpha

Re: Recent Project - Luther’s Rose

Postby Leo » Mon Jul 09, 2018 1:31 pm

Beautiful Display.
It will be there in the church for generations
Imagine the Possibilities of a Creative mind

www.leosworkshop.com
User avatar
Leo
Vectric Wizard
 
Posts: 2672
Joined: Sat Jul 14, 2007 3:02 am
Location: East Freetown, Ma.
Model of CNC Machine: 1300 x 1300 x 254

Re: Recent Project - Luther’s Rose

Postby jimalee » Sun Jul 15, 2018 1:12 am

amazing work
jimalee
 
Posts: 23
Joined: Mon Mar 19, 2018 11:23 am
Model of CNC Machine: Bobs E3 cnc


Return to VCarve - Gallery

Who is online

Users browsing this forum: No registered users and 12 guests