Arts and Crafts inspired clock

An area to upload images of pieces cut using VCarve Pro
Post Reply
dseaver
Posts: 5
Joined: Fri Sep 04, 2009 2:03 pm
Model of CNC Machine: Camaster Stinger 2 4 by 4
Location: Troy, New York

Arts and Crafts inspired clock

Post by dseaver »

Attached is a clock inspired by the Arts and Crafts/Mission style. The clock frame is made of figured quarter sawn white oak. The 3D insert is a hummingbird model from Design and Make.com. The 3D model was cnc cut from 3/4" oak. The finished carving was finished with a dark stain and color was added using acrylic paint as a wash. The clock face was laser engraved. Overall dimensions of the clock is 14" wide and 25" tall.
Attachments
IMG_4922 (2).JPG

User avatar
mtylerfl
Vectric Archimage
Posts: 5865
Joined: Thu Jan 29, 2009 3:54 am
Model of CNC Machine: -CarveWright CNC -ShopBot Buddy PRSAlpha
Location: Brunswick, GA

Re: Arts and Crafts inspired clock

Post by mtylerfl »

Nice work, Dave!
Michael Tyler

facebook.com/carvebuddy

-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC

User avatar
Rcnewcomb
Vectric Archimage
Posts: 5886
Joined: Fri Nov 04, 2005 5:54 am
Model of CNC Machine: 24x36 GCnC/WinCNC with ATC
Location: San Jose, California, USA
Contact:

Re: Arts and Crafts inspired clock

Post by Rcnewcomb »

Excellent use of the quarter sawn white oak!
- Randall Newcomb
10 fingers in, 10 fingers out, another good day in the shop

MoHawk
Posts: 12
Joined: Tue Jan 11, 2011 4:41 pm
Model of CNC Machine: Avid CNC Pro 4824
Location: Mid Missouri

Re: Arts and Crafts inspired clock

Post by MoHawk »

Very nice AC work. I like the addition of the hummingbird.

mark-s
Vectric Craftsman
Posts: 216
Joined: Sat Feb 03, 2018 2:03 am
Model of CNC Machine: diy 4 X 4 CNC Router
Location: So. Cal.

Re: Arts and Crafts inspired clock

Post by mark-s »

Nice work.
mark-s

Post Reply