New long time project
Posted: Mon Apr 23, 2018 8:52 pm
I have set myself up to a new many piece project. I plan to do all 32 counties of Ireland.
1 = Corian
2 = 6.875
3 = 11.875
4 = 1/2 About 2 hours per. Using the quick engrave. .005 deep I am using a V bit with a .060 flat
cross hatch set at .060 line width.
This was a test cut and I forgot the number one RULE measure twice and cut once.
So County Cavan will need to be redone. I do not know how deep the texture in corian
is. I may try to surface this piece and use it again.
You may see some spots that look like missed parts. those are a reflection from water I just rinsed it
Don
1 = Corian
2 = 6.875
3 = 11.875
4 = 1/2 About 2 hours per. Using the quick engrave. .005 deep I am using a V bit with a .060 flat
cross hatch set at .060 line width.
This was a test cut and I forgot the number one RULE measure twice and cut once.
So County Cavan will need to be redone. I do not know how deep the texture in corian
is. I may try to surface this piece and use it again.
You may see some spots that look like missed parts. those are a reflection from water I just rinsed it
Don