New long time project

An area to upload images of pieces cut using VCarve Pro

New long time project

Postby Makingtoothpicks » Mon Apr 23, 2018 8:52 pm

I have set myself up to a new many piece project. I plan to do all 32 counties of Ireland.
1 = Corian
2 = 6.875
3 = 11.875
4 = 1/2 About 2 hours per. Using the quick engrave. .005 deep I am using a V bit with a .060 flat
cross hatch set at .060 line width.

This was a test cut and I forgot the number one RULE measure twice and cut once.
So County Cavan will need to be redone. I do not know how deep the texture in corian
is. I may try to surface this piece and use it again.

You may see some spots that look like missed parts. those are a reflection from water I just rinsed it

Don
Attachments
Cavan.jpg
User avatar
Makingtoothpicks
Vectric Wizard
 
Posts: 443
Joined: Tue Jul 23, 2013 8:46 pm
Location: Burien, Wa
Model of CNC Machine: Cncrouterparts CPR2448

Re: New long time project

Postby Makingtoothpicks » Mon Apr 23, 2018 9:02 pm

Amagh just off the machine no color yet
Attachments
IMG_0679.JPG
User avatar
Makingtoothpicks
Vectric Wizard
 
Posts: 443
Joined: Tue Jul 23, 2013 8:46 pm
Location: Burien, Wa
Model of CNC Machine: Cncrouterparts CPR2448

Re: New long time project

Postby Samson » Tue Apr 24, 2018 7:03 pm

The pattern of the Corian, goes all the way through. So resurfacing the face would be fine.
Samson
Vectric Craftsman
 
Posts: 223
Joined: Fri May 02, 2014 10:14 pm
Model of CNC Machine: 4x4

Re: New long time project

Postby Makingtoothpicks » Tue Apr 24, 2018 8:21 pm

Thank you I will give it a try.

Don
User avatar
Makingtoothpicks
Vectric Wizard
 
Posts: 443
Joined: Tue Jul 23, 2013 8:46 pm
Location: Burien, Wa
Model of CNC Machine: Cncrouterparts CPR2448


Return to VCarve - Gallery

Who is online

Users browsing this forum: No registered users and 12 guests