nice to know you can bake with these too ;-p
Posted: Tue Apr 17, 2018 6:46 pm
Shifting the learning curve over to HDPE and soft metals to explore what can be done with them...
Little did I know you could bake pretty good looking large 6" oreo cookies with the AR8Pro+and VCP Pro 9...
Grabbed a couple of scraps of 1/4" black and a 6x6 1/2" HDPE and using a dxf file from Buck4 (Thanks Buck
here at the VCP forum...cut nice and quick with a 90 v-bit and cut out with an 1/8" o flute EM...bout 20 mins per outer layer and a matter of a minute or 2 for the cutout...still need to do a little clean-up and still working on the feeds and speeds but at least I won't go hungry ;-p
Little did I know you could bake pretty good looking large 6" oreo cookies with the AR8Pro+and VCP Pro 9...
Grabbed a couple of scraps of 1/4" black and a 6x6 1/2" HDPE and using a dxf file from Buck4 (Thanks Buck
here at the VCP forum...cut nice and quick with a 90 v-bit and cut out with an 1/8" o flute EM...bout 20 mins per outer layer and a matter of a minute or 2 for the cutout...still need to do a little clean-up and still working on the feeds and speeds but at least I won't go hungry ;-p