Quick Release Plate for Tripod

An area to upload images of pieces cut using VCarve Pro

Quick Release Plate for Tripod

Postby llwood » Thu Apr 12, 2018 7:11 pm

This is just a simple practical project. I bought a tripod at a thrift shop for $7, but when I got home, I realized that a part of it was missing. A piece called the quick release plate has the screw which attaches to the camera. Without it, it wasn't usable. I looked online to see if I could find a replacement, but there are so many different shapes and sizes and models that I wasn't sure I would get a correct fit. Also, including shipping, ordering just a quick release plate would cost more than I paid for the tripod, sometimes even more than buying a new one. So I decided to make a new one of wood. As you can see from the pictures, it works quite well. Now, I can quickly release the camera from the tripod for hand-held footage, and quickly put it back in the tripod in the same position.
Attachments
QRP by itself.jpg
Quick Release plate by itself
QRP in tripod.jpg
Quick release plate locked into tripod
QRP in camera.jpg
Quick release plate screwed into camera
QRP in both.jpg
Quick release plate securing the camera to the tripod.
User avatar
llwood
Vectric Wizard
 
Posts: 362
Joined: Sun Nov 18, 2012 5:07 pm
Location: Dillsburg, PA
Model of CNC Machine: Legacy Maverick

Re: Quick Release Plate for Tripod

Postby joeporter » Fri Apr 13, 2018 3:36 pm

Perfect!!...joe
joeporter
Vectric Wizard
 
Posts: 484
Joined: Tue Jul 21, 2009 8:22 pm
Location: Marietta, GA.
Model of CNC Machine: ShopBot Buddy Standard

Re: Quick Release Plate for Tripod

Postby Todd Bailey » Fri Apr 13, 2018 6:29 pm

Excellent idea!!! Well done.
------------------------------------
Todd Bailey | Design and Make
DesignAndMake.com
User avatar
Todd Bailey
Vectric Staff
 
Posts: 153
Joined: Mon Nov 24, 2014 8:40 pm
Model of CNC Machine: CraftCNC


Return to VCarve - Gallery

Who is online

Users browsing this forum: No registered users and 8 guests