Cutting Board

An area to upload images of pieces cut using VCarve Pro
Post Reply
User avatar
rgerding
Vectric Craftsman
Posts: 127
Joined: Mon Nov 28, 2016 7:29 pm
Model of CNC Machine: Iconic 2015
Location: Ottawa,OH

Cutting Board

Post by rgerding »

A cutting board is a simple project that can be very professional with a juice groove made with a ball nose cutter.
Attachments
IMG_0460.JPG
Ron
If sawdust were gold, I'd be very rich

gad5264
Vectric Apprentice
Posts: 67
Joined: Wed Dec 03, 2014 5:33 pm
Model of CNC Machine: GarageWorX 18"x24"' using VCarvePro V10
Location: Westerville, OHIO

Re: Cutting Board

Post by gad5264 »

Very nice
Grant "gad5264"
Westerville, OH

Jane Ndungu
Vectric Craftsman
Posts: 201
Joined: Fri Oct 31, 2014 8:14 am
Model of CNC Machine: TS1325

Re: Cutting Board

Post by Jane Ndungu »

Lovely project indeed.
I wouldn't mind the crv files if possible.

regards
Jane

User avatar
rgerding
Vectric Craftsman
Posts: 127
Joined: Mon Nov 28, 2016 7:29 pm
Model of CNC Machine: Iconic 2015
Location: Ottawa,OH

Re: Cutting Board

Post by rgerding »

After gluing the two different strips of wood together and planing to a 3/4" thickness, I carved the groove and Bon Appetit script. The radius corners were cut on a band saw and sanded on an oscillating spindle sander. I used a 1/4" round bit in hand router for the bottom and top edges. Everything was sanded to a 400 grit finish. Howard Butcher Block Conditioner was used to finish the project.
Ron
Attachments
cutting board3.crv
(463.5 KiB) Downloaded 300 times
Ron
If sawdust were gold, I'd be very rich

Jane Ndungu
Vectric Craftsman
Posts: 201
Joined: Fri Oct 31, 2014 8:14 am
Model of CNC Machine: TS1325

Re: Cutting Board

Post by Jane Ndungu »

Thank you so very much, I look forward to doing one soon.

Regards
Jane

Post Reply