birdhouse front

An area to upload images of pieces cut using VCarve Pro
Post Reply
User avatar
sharkcutup
Vectric Wizard
Posts: 2885
Joined: Sat Mar 26, 2016 3:48 pm
Model of CNC Machine: Shark HD3 Pro Extended Bed with Spindle
Location: U.S.A.

birdhouse front

Post by sharkcutup »

birdhouse cat.jpg
Just Thought I would try cutting this birdhouse front of a cat. It turned out very well using my Shark CNC HD3 Extended bed machine. It was cut using just two bits .25 endmil (clear cut) and .125 endmill (cleanup cut). It was cut from a 1.0625" thick pine stair board.

The original design is created by cutting each piece on a scroll saw or band saw and then gluing all the pieces together to create the completed project. My goal was to see if it could be cut all together from one board thickness thereby saving time.

I believe my goal has been achieved!!!

Sharkcutup
V-Carve Pro Tips, Gadget Tips & Videos
YouTube Channel - Sharkcutup CNC
V-Carve Pro 11.554

Savannahdan
Vectric Wizard
Posts: 520
Joined: Sun May 03, 2015 12:25 pm
Model of CNC Machine: Axiom AR8
Location: Savannah, GA

Re: birdhouse front

Post by Savannahdan »

Looks like a fun project. Not sure if I were a bird that I'd fly into that opening. :lol:

Post Reply