Keepsake Box

An area to upload images of pieces cut using VCarve Pro
Post Reply
rickmcolorado
Posts: 7
Joined: Tue May 23, 2017 11:48 pm
Model of CNC Machine: Home made - 2 ft. X 4 ft.
Location: Frederick, CO

Keepsake Box

Post by rickmcolorado »

My grand daugther just got engaged so I made her a Keepsake box for her to keep her memories. I made it out of maple and used VCarvePro to cut it out and engrave the top lid both top and inside.

I have attached a few pictures of it. Hope you like it.
Attachments
Outside of Box
Outside of Box
Box opened
Box opened

Savannahdan
Vectric Wizard
Posts: 520
Joined: Sun May 03, 2015 12:25 pm
Model of CNC Machine: Axiom AR8
Location: Savannah, GA

Re: Keepsake Box

Post by Savannahdan »

Very nice and thank you for sharing. She will really treasure the memory that you made the box for her.

User avatar
gkas
Vectric Wizard
Posts: 1450
Joined: Sun Jan 01, 2017 3:39 am
Model of CNC Machine: Aspire, Axiom AR8 Pro+, Axiom 4.2W Laser
Location: Southern California

Re: Keepsake Box

Post by gkas »

Nice. I like the simplicity, yet elegance, of the design.

User avatar
Rcnewcomb
Vectric Archimage
Posts: 5887
Joined: Fri Nov 04, 2005 5:54 am
Model of CNC Machine: 24x36 GCnC/WinCNC with ATC
Location: San Jose, California, USA
Contact:

Re: Keepsake Box

Post by Rcnewcomb »

Do you make the box and lid separately, or do you make a fully enclosed box and then cut off the lid?
- Randall Newcomb
10 fingers in, 10 fingers out, another good day in the shop

User avatar
dwilli9013
Vectric Wizard
Posts: 1237
Joined: Mon Sep 30, 2013 12:45 am
Model of CNC Machine: 3 axis Self Designed Self Built
Location: Machesney Park Illinois

Re: Keepsake Box

Post by dwilli9013 »

Very Nice. Thanks for sharing.
D-Dub
Dwayne
Dwilli

Post Reply