Spoil board upgrades

An area to upload images of pieces cut using VCarve Pro
Post Reply
jeremym87
Posts: 8
Joined: Sun Jan 15, 2017 9:07 pm
Model of CNC Machine: OX Openbuilds

Spoil board upgrades

Post by jeremym87 »

Added some Rockler clamps and T tracks to my CNC today. Also milled the MDF board down to get true flat Z axis. Took me about a year of using my CNC to figure out how i wanted to design the clamp system - it is simple but it will serve my needs. Hope someone else gets inspiration from this.
F6D16DA6-3439-4753-9ED8-D5F101429355.JPG

User avatar
Mark's Wood Chips
Vectric Craftsman
Posts: 201
Joined: Thu Mar 19, 2015 12:36 pm
Model of CNC Machine: ShopSabre 23 with Rotary
Location: Hubertus, WI 53033
Contact:

Re: Spoil board upgrades

Post by Mark's Wood Chips »

Looks similar to my setup. I see you scribed lines in the X direction to help orient your work, good idea!

Mark

Post Reply