The Dancing Clock

An area to upload images of pieces cut using VCarve Pro

The Dancing Clock

Postby W3LMR » Sat May 13, 2017 12:08 am

95% credit for this project goes to Wood Magazine 2010 July issue. All I did was take their pdf files and changed them in crv files. Then I added some oak & maple and for the finish-it was given to my three small grandchildren!
Attachments
Image-1.png - Copy.jpg
GetFileAttachment - Copy - Copy.jpg
GetFileAttachment - Copy (2).jpg
Image-2.png - Copy - Copy.jpg
W3LMR
Vectric Apprentice
 
Posts: 56
Joined: Sun Feb 09, 2014 8:22 pm
Location: Telford, PA
Model of CNC Machine: Homebuilt/ 32" x 54"

Re: The Dancing Clock

Postby mtylerfl » Sat May 13, 2017 1:06 am

That came out great. I'm sure the grandkids love 'em!
Michael Tyler

carvebuddy.com

facebook.com/carvebuddy

-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC
User avatar
mtylerfl
Vectric Wizard
 
Posts: 2972
Joined: Thu Jan 29, 2009 3:54 am
Location: Brunswick, GA
Model of CNC Machine: -CarveWright CNC -ShopBot Buddy PRSAlpha

Re: The Dancing Clock

Postby ozymax » Sat May 13, 2017 1:32 am

I made one of these for a very special little girl, last year.
The plans are for a boy, so I did some extra work and made a girl.
Sounds like you went through the same process as I did.

Mod dancing clock.jpg
ozymax
Vectric Craftsman
 
Posts: 168
Joined: Thu Jan 02, 2014 4:34 am
Model of CNC Machine: Home built cnc router using Mach3.

Re: The Dancing Clock

Postby shooter1940 » Mon May 22, 2017 11:07 pm

Very nice!! Are you a ham operator by chance? I am N5PU.
shooter1940
 
Posts: 7
Joined: Thu Mar 02, 2017 9:51 pm
Model of CNC Machine: cnc shark hd4

Re: The Dancing Clock

Postby W3LMR » Tue May 23, 2017 1:57 am

I am W3LMR Always good to meet a fellow Ham Operator & fellow woodworker!
W3LMR
Vectric Apprentice
 
Posts: 56
Joined: Sun Feb 09, 2014 8:22 pm
Location: Telford, PA
Model of CNC Machine: Homebuilt/ 32" x 54"

Re: The Dancing Clock

Postby Night Hawk » Tue Jun 20, 2017 3:58 pm

Not to run off on a tangent but N5IWA here.

73
Night Hawk
 
Posts: 7
Joined: Wed Mar 29, 2017 4:07 am
Location: Dallas, TX
Model of CNC Machine: PIRANHA

Re: The Dancing Clock

Postby hooked » Tue Jun 20, 2017 8:09 pm

This could go on :-)

VK3AWA
User avatar
hooked
Vectric Apprentice
 
Posts: 58
Joined: Mon Oct 12, 2015 10:06 pm
Location: Paradise Beach - Australia
Model of CNC Machine: SCRATCH BUILT CNC ROUTER

Re: The Dancing Clock

Postby Phil » Wed Jun 21, 2017 1:32 pm

I found the plans for this clock here https://www.skiltools.com/How-To/Docume ... ClockR.pdf.
It was postred by Skil tools, I'd have to assume that they had permission from Wood Magazine
User avatar
Phil
Vectric Wizard
 
Posts: 2154
Joined: Thu Nov 17, 2005 10:56 pm
Location: Pittsfield, MA

Re: The Dancing Clock

Postby sharkcutup » Wed Jun 21, 2017 5:08 pm

Here are my versions of the Dancing Clock. They are designed to be hanging wall clocks to avoid any child play accidents!

Optimized-boy_clock.jpg
Optimized-girl_clock.jpg

Sharkcutup
Facebook: Hogan's CNC Crafts
Website: hoganscnccrafts.com
sharkcutup
Vectric Craftsman
 
Posts: 150
Joined: Sat Mar 26, 2016 3:48 pm
Model of CNC Machine: Shark HD3 Pro Extended Bed with Spindle

Re: The Dancing Clock

Postby gscott40 » Mon Jun 26, 2017 11:28 pm

The originating plans are from Meisel Hardware Specialties, http://meiselwoodhobby.com/Products/Vie ... ;Path=2941 and are a bit more money that Wood Magazine sells them for....$15.00. They, Meisel, sell the clock kit and face...for a bit more of course. Cute never the less and youse guys did a great job. On my bucket list now.

George
WA0FSE
George
Fridley, MN
Legacy Arty, Aspire, CCAM
gscott40
 
Posts: 40
Joined: Sat Feb 02, 2013 4:45 pm
Location: Fridley, MN
Model of CNC Machine: Legacy Arty 58

Re: The Dancing Clock

Postby VE5MDH » Wed Apr 18, 2018 2:24 pm

What beautiful work for the Children, Gentlemen!


Just sharing my Canadian presence with the crowd! Very talented HAM's on this forum.
I`m pleased to welcome my existence to the Vectric community as a Newbie!

Hope to be able to share some of my ideas once I am able to purchase my CNC later this Spring (I`ve been waiting since I quit smoking back in October 2015... but then again other commitments...).

73 de
VE5MDH
Michael
VE5MDH
 
Posts: 14
Joined: Sun Sep 17, 2017 6:41 am
Model of CNC Machine: Shapeoko3 XL (Not yet purchased - Newbie


Return to VCarve - Gallery

Who is online

Users browsing this forum: ctbjdm and 9 guests