Playing with fire...wood.

An area to upload images of pieces cut using VCarve Pro
User avatar
Bob Jr
Vectric Wizard
Posts: 463
Joined: Thu Aug 13, 2009 2:13 am
Model of CNC Machine: Axiom, Shark

Re: Playing with fire...wood.

Post by Bob Jr »

Still playing. This time I tried the moulding toolpath, combined with the pocketing toolpath instead of fluting:
lb5.jpg
I probably should have placed a scale giving device into the scan. I did set the proper scale while working on the pattern by drawing a vertical line of the correct length of the bowl, then resizing the picture by dragging a corner until the picture matched the line.
Bob
"Be accurate."
W. Tell

User avatar
Bob Jr
Vectric Wizard
Posts: 463
Joined: Thu Aug 13, 2009 2:13 am
Model of CNC Machine: Axiom, Shark

Re: Playing with fire...wood.

Post by Bob Jr »

Leo wrote:Beautiful.

Firewood is tough though.

Every piece of firewood I through in the wood-stove could live a more glorious life, BUT, I do need to heat the house too.
Leo,
Actually, I did make some fancy firewood along the way:
firewood.jpg
Learning is fun.
Bob
"Be accurate."
W. Tell

Post Reply