An area to upload images of pieces cut using VCarve Pro
LorenzoJ
Posts: 3 Joined: Tue Sep 12, 2006 7:26 pm
Location: Norwood, MA USA
Post
by LorenzoJ » Sat Oct 28, 2006 4:26 pm
Phil from Pittsfield, MA asked about thin plywood sources. Boulter Plywood in Somerville, MA (they have a website) has been a supplier of exotic and marine plywoods for many years. Large sizes down to 3-ply 1/32"
maldak
Posts: 21 Joined: Wed May 24, 2006 3:14 pm
Model of CNC Machine: Flexicam, ShopBot Buddy BT48,Vision 2448
Location: Blauvelt, New York
Post
by maldak » Thu Nov 02, 2006 3:02 pm
dighsx wrote: Found a few more files. It might have few that have already been posted (trex) but it's got 3 or 4 new dino's.
Here are pictures of 3 of the 5 files in this set.
Hi,
Do you have a file that includes these projects - the alder.jpg, fliegel.jpg and spinne.jpg?
Thanks
Tom
rnweller
Vectric Apprentice
Posts: 59 Joined: Fri Feb 10, 2006 6:11 pm
Model of CNC Machine: ShopBot
Location: Lexington, TN
Post
by rnweller » Thu Nov 02, 2006 7:14 pm
Tom,
Look in the Dinos_II.zip file from Jay.
Norm
maldak
Posts: 21 Joined: Wed May 24, 2006 3:14 pm
Model of CNC Machine: Flexicam, ShopBot Buddy BT48,Vision 2448
Location: Blauvelt, New York
Post
by maldak » Thu Nov 02, 2006 11:07 pm
rnweller wrote: Tom,
Look in the Dinos_II.zip file from Jay.
Norm
Thanks Jay -
I can't seem to find the Alder file with the eagle - all the others
seem to be there. Any idea if it's in another .zip file?
Thanks again
Tom
rnweller
Vectric Apprentice
Posts: 59 Joined: Fri Feb 10, 2006 6:11 pm
Model of CNC Machine: ShopBot
Location: Lexington, TN
Post
by rnweller » Sat Nov 04, 2006 10:22 pm
Tom,
Check the zip file. Hope this helps.
Norm
Attachments
adler.zip
(47.63 KiB) Downloaded 328 times
maldak
Posts: 21 Joined: Wed May 24, 2006 3:14 pm
Model of CNC Machine: Flexicam, ShopBot Buddy BT48,Vision 2448
Location: Blauvelt, New York
Post
by maldak » Sun Nov 05, 2006 1:35 am
Great !!
Thanks again for all the help.
Tom