The Dancing Clock

An area to upload images of pieces cut using VCarve Pro
Post Reply
W3LMR
Vectric Apprentice
Posts: 56
Joined: Sun Feb 09, 2014 8:22 pm
Model of CNC Machine: Homebuilt/ 32" x 54"
Location: Telford, PA

The Dancing Clock

Post by W3LMR »

95% credit for this project goes to Wood Magazine 2010 July issue. All I did was take their pdf files and changed them in crv files. Then I added some oak & maple and for the finish-it was given to my three small grandchildren!
Attachments
Image-1.png - Copy.jpg
GetFileAttachment - Copy - Copy.jpg
GetFileAttachment - Copy (2).jpg
Image-2.png - Copy - Copy.jpg

User avatar
mtylerfl
Vectric Archimage
Posts: 5865
Joined: Thu Jan 29, 2009 3:54 am
Model of CNC Machine: -CarveWright CNC -ShopBot Buddy PRSAlpha
Location: Brunswick, GA

Re: The Dancing Clock

Post by mtylerfl »

That came out great. I'm sure the grandkids love 'em!
Michael Tyler

facebook.com/carvebuddy

-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC

ozymax
Vectric Craftsman
Posts: 245
Joined: Thu Jan 02, 2014 4:34 am
Model of CNC Machine: Home built cnc router using Masso G3.

Re: The Dancing Clock

Post by ozymax »

I made one of these for a very special little girl, last year.
The plans are for a boy, so I did some extra work and made a girl.
Sounds like you went through the same process as I did.
Mod dancing clock.jpg

shooter1940
Posts: 7
Joined: Thu Mar 02, 2017 9:51 pm
Model of CNC Machine: cnc shark hd4

Re: The Dancing Clock

Post by shooter1940 »

Very nice!! Are you a ham operator by chance? I am N5PU.

W3LMR
Vectric Apprentice
Posts: 56
Joined: Sun Feb 09, 2014 8:22 pm
Model of CNC Machine: Homebuilt/ 32" x 54"
Location: Telford, PA

Re: The Dancing Clock

Post by W3LMR »

I am W3LMR Always good to meet a fellow Ham Operator & fellow woodworker!

Night Hawk
Posts: 17
Joined: Wed Mar 29, 2017 4:07 am
Model of CNC Machine: PIRANHA
Location: Dallas, TX

Re: The Dancing Clock

Post by Night Hawk »

Not to run off on a tangent but N5IWA here.

73

User avatar
hooked
Vectric Apprentice
Posts: 60
Joined: Mon Oct 12, 2015 10:06 pm
Model of CNC Machine: SCRATCH BUILT CNC ROUTER
Location: Paradise Beach - Australia
Contact:

Re: The Dancing Clock

Post by hooked »

This could go on :-)

VK3AWA

User avatar
Phil
Vectric Wizard
Posts: 3026
Joined: Thu Nov 17, 2005 10:56 pm
Location: Pittsfield, MA

Re: The Dancing Clock

Post by Phil »

I found the plans for this clock here https://www.skiltools.com/How-To/Docume ... ClockR.pdf.
It was postred by Skil tools, I'd have to assume that they had permission from Wood Magazine

User avatar
sharkcutup
Vectric Wizard
Posts: 2885
Joined: Sat Mar 26, 2016 3:48 pm
Model of CNC Machine: Shark HD3 Pro Extended Bed with Spindle
Location: U.S.A.

Re: The Dancing Clock

Post by sharkcutup »

Here are my versions of the Dancing Clock. They are designed to be hanging wall clocks to avoid any child play accidents!
Optimized-boy_clock.jpg
Optimized-girl_clock.jpg
Sharkcutup
V-Carve Pro Tips, Gadget Tips & Videos
YouTube Channel - Sharkcutup CNC
V-Carve Pro 11.554

gscott40
Posts: 49
Joined: Sat Feb 02, 2013 4:45 pm
Model of CNC Machine: Legacy Arty 58
Location: Fridley, MN

Re: The Dancing Clock

Post by gscott40 »

The originating plans are from Meisel Hardware Specialties, http://meiselwoodhobby.com/Products/Vie ... &Path=2941 and are a bit more money that Wood Magazine sells them for....$15.00. They, Meisel, sell the clock kit and face...for a bit more of course. Cute never the less and youse guys did a great job. On my bucket list now.

George
WA0FSE
George
Fridley, MN
Legacy Arty, Aspire, CCAM

VE5MDH
Posts: 44
Joined: Sun Sep 17, 2017 6:41 am
Model of CNC Machine: Shapeoko3
Location: Saskatchewan, Canada

Re: The Dancing Clock

Post by VE5MDH »

What beautiful work for the Children, Gentlemen!


Just sharing my Canadian presence with the crowd! Very talented HAM's on this forum.
I`m pleased to welcome my existence to the Vectric community as a Newbie!

Hope to be able to share some of my ideas once I am able to purchase my CNC later this Spring (I`ve been waiting since I quit smoking back in October 2015... but then again other commitments...).

73 de
VE5MDH
Michael

Post Reply