I really liked Michael Tyler's Gothic Wall Shelf, last month's free project, but we don't have Aspire. So I came up with a version of it for VCarve Pro. Although it is based on Michael's design, I had to make some minor changes to get it to work with 2.5D toolpaths rather than 3D. I changed the design at the base of the pillar, and had to change how the arches meet the top of the pillar. Other than that, I think it's a pretty good likeness.
Andy and Marty
Locust Lane Woodworking
Gothic Wall Shelf for VCarve Pro
- llwood
- Vectric Wizard
- Posts: 392
- Joined: Sun Nov 18, 2012 5:07 pm
- Model of CNC Machine: Legacy Maverick
- Location: Dillsburg, PA
- Contact:
Re: Gothic Wall Shelf for VCarve Pro
Thanks to Michael Tyler for this beautiful design. I tried to match it as close as I was able. Here are the VCP files. --Andy
- Attachments
-
- Gothic Wall Shelf Back 2.crv
- (1.45 MiB) Downloaded 264 times
-
- Shelf and bracket 2.crv
- (266.5 KiB) Downloaded 229 times
-
- Posts: 47
- Joined: Mon Nov 30, 2015 9:54 pm
- Model of CNC Machine: Shapeoko
- Location: Schaumnurg, Illinois
Re: Gothic Wall Shelf for VCarve Pro
Thanks for your work. I am looking forward to making this.
-
- Vectric Craftsman
- Posts: 286
- Joined: Fri May 29, 2015 1:51 am
- Model of CNC Machine: Shop-Made Router
- Location: Arizona
Re: Gothic Wall Shelf for VCarve Pro
Thanks for doing this, it looks very good.
-
- Vectric Craftsman
- Posts: 197
- Joined: Sun Apr 03, 2011 3:07 pm
- Model of CNC Machine: Probotix GX2525 with rotary
- Location: Erie, PA
Re: Gothic Wall Shelf for VCarve Pro
Thanks for all your hard work.
John
John
- scottp55
- Vectric Wizard
- Posts: 4717
- Joined: Thu May 09, 2013 11:30 am
- Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP11.5
- Location: Kennebunkport, Maine, US
Re: Gothic Wall Shelf for VCarve Pro
Thank you VERY much guys
scott
scott
I've learned my lesson well. You can't please everyone,so you have to please yourself
R.N.
R.N.
-
- Posts: 46
- Joined: Fri Sep 21, 2012 3:56 am
- Model of CNC Machine: Self Built Router and Sieg SX3
- Location: New Zealand
Re: Gothic Wall Shelf for VCarve Pro
Well done, thank you for posting the File.
-
- Vectric Wizard
- Posts: 493
- Joined: Sat Jun 11, 2011 3:27 pm
- Model of CNC Machine: Probotix Meteor 25 x 50
- Location: Jefferson City, Mo.
Re: Gothic Wall Shelf for VCarve Pro
I had the same thoughts you did, but work is busier than ever. Thanks for sharing the files. It looks really good.
Dave
Dave
- highpockets
- Vectric Wizard
- Posts: 3667
- Joined: Tue Jan 06, 2015 4:04 pm
- Model of CNC Machine: PDJ Pilot Pro
Re: Gothic Wall Shelf for VCarve Pro
Thank you for converting this over to VCarve Pro! I've been wanting to do this project for a while, just never spent the time to convert it over.
Great Job!
Great Job!
John
Maker of Chips
Maker of Chips