blueberry sign

An area to upload images of pieces cut using VCarve Pro

blueberry sign

Postby johnny469 » Sun Apr 10, 2016 12:02 am

This is the sign I made for a customer. It is 3' x 4'. I cut out the lettering and blueberries out on the cnc. The blueberries measured out at the longest art 18" x 18". It was to big for my machine so I had to tile it and then cut the 2" slab in half. I then cut each section out on the halves and re-attached them after it was done carving.
Posts: 9
Joined: Thu Apr 07, 2016 2:52 pm
Model of CNC Machine: pirahna fx

Return to VCarve - Gallery

Who is online

Users browsing this forum: BessieHunter and 15 guests