Without Music Life Would
-
- Vectric Apprentice
- Posts: 56
- Joined: Sun Feb 09, 2014 8:22 pm
- Model of CNC Machine: Homebuilt/ 32" x 54"
- Location: Telford, PA
Without Music Life Would
I had a one inch piece of African Mahogany 8" wide and 22" long. I found this on a free scroll saw web site. I changed the pdf files into Vcarve files. The stain is Golden Oak applied by brush into all the tool paths to give them all a darker look. Then the same stain was applied by hand rubbing the remaining plaque. I then applied one coat of hand rub polyurethane. There are some music lovers in my family. Thanks for looking!
- esteeme1
- Vectric Wizard
- Posts: 2132
- Joined: Tue Nov 02, 2010 3:26 pm
- Model of CNC Machine: Cobra 404 ATC; ROMAX WD-1; Shark
- Location: Chesapeake VA
- Contact:
Re: Without Music Life Would
Is that Old McDonald? Looks great.
Jim Darlas
"Can Do!"
http://www.esteemedwoodcrafts.com/
http://www.esteemedplaques.com/
"Can Do!"
http://www.esteemedwoodcrafts.com/
http://www.esteemedplaques.com/
-
- Vectric Apprentice
- Posts: 56
- Joined: Sun Feb 09, 2014 8:22 pm
- Model of CNC Machine: Homebuilt/ 32" x 54"
- Location: Telford, PA
Re: Without Music Life Would
Thanks Jim. I used Palatino and V-Carve/Engraving Toolpath
- martin54
- Vectric Archimage
- Posts: 7355
- Joined: Fri Nov 09, 2012 2:12 pm
- Model of CNC Machine: Gerber 48, Triac PC, Isel fixed gantry
- Location: Kirkcaldy, Scotland
Re: Without Music Life Would
I think Jim was referring to the musical notes not the font you usedW3LMR wrote:Thanks Jim. I used Palatino and V-Carve/Engraving Toolpath
-
- Vectric Apprentice
- Posts: 56
- Joined: Sun Feb 09, 2014 8:22 pm
- Model of CNC Machine: Homebuilt/ 32" x 54"
- Location: Telford, PA
Re: Without Music Life Would
Laughing-sorry-still on my first Monday morning coffee!
-
- Vectric Apprentice
- Posts: 60
- Joined: Wed Jul 01, 2015 10:18 pm
- Model of CNC Machine: Openbuilds ox
Re: Without Music Life Would
Looks good! Very clean. Great job.
- esteeme1
- Vectric Wizard
- Posts: 2132
- Joined: Tue Nov 02, 2010 3:26 pm
- Model of CNC Machine: Cobra 404 ATC; ROMAX WD-1; Shark
- Location: Chesapeake VA
- Contact:
Re: Without Music Life Would
W3LMR wrote:Laughing-sorry-still on my first Monday morning coffee!
Me too that's funny!
Jim Darlas
"Can Do!"
http://www.esteemedwoodcrafts.com/
http://www.esteemedplaques.com/
"Can Do!"
http://www.esteemedwoodcrafts.com/
http://www.esteemedplaques.com/
Re: Without Music Life Would
the sign is very good. for those of us who always have "Pandora" playing in the shop, but zero music knowledge other than listening, I don't understand. would be what? ted
- Mike-S
- Vectric Wizard
- Posts: 1123
- Joined: Mon Jun 13, 2011 6:45 am
- Model of CNC Machine: Joe's Hybrid 4x4 (but 3x3)
- Location: Hayesville, NC
Re: Without Music Life Would
"Flat" as in not "Sharp"
- FixitMike
- Vectric Wizard
- Posts: 2177
- Joined: Sun Apr 17, 2011 5:21 am
- Model of CNC Machine: Shark Pro Plus (retired)
- Location: Burien, WA USA
Re: Without Music Life Would
Love it! Would you post the file so I can make one too?
Good judgement comes from experience.
Experience comes from bad judgement.
Experience comes from bad judgement.
- esteeme1
- Vectric Wizard
- Posts: 2132
- Joined: Tue Nov 02, 2010 3:26 pm
- Model of CNC Machine: Cobra 404 ATC; ROMAX WD-1; Shark
- Location: Chesapeake VA
- Contact:
Re: Without Music Life Would
OMG I'm laughing harder!!!! At my self. I looked right threw the Bd note.
Jim Darlas
"Can Do!"
http://www.esteemedwoodcrafts.com/
http://www.esteemedplaques.com/
"Can Do!"
http://www.esteemedwoodcrafts.com/
http://www.esteemedplaques.com/
Re: Without Music Life Would
mike, thank you. so all the symbols mean flat?
-
- Vectric Apprentice
- Posts: 56
- Joined: Sun Feb 09, 2014 8:22 pm
- Model of CNC Machine: Homebuilt/ 32" x 54"
- Location: Telford, PA
Re: Without Music Life Would
Thanks everyone for the great comments & laughs! I did not post the files because I got the idea from this website: http://stevedgood.com/catalog/
Just type in music in the search field: I changed his pdf files into crv files. Again-Thanks!
Just type in music in the search field: I changed his pdf files into crv files. Again-Thanks!
-
- Vectric Craftsman
- Posts: 123
- Joined: Thu Nov 01, 2012 2:05 am
- Model of CNC Machine: Camaster Panther 4x8
Re: Without Music Life Would
No, those are notes. It's kind of a play on words. Bb in music is said as b flat. So the sign reads without music life would be flat. As in boring or uninteresting.bluridg wrote:mike, thank you. so all the symbols mean flat?
- esteeme1
- Vectric Wizard
- Posts: 2132
- Joined: Tue Nov 02, 2010 3:26 pm
- Model of CNC Machine: Cobra 404 ATC; ROMAX WD-1; Shark
- Location: Chesapeake VA
- Contact:
Re: Without Music Life Would
No music major here but I believe flat notes are identified with hollow notes i.e. not solid and are reversed from what is shown. But my dyslexia could be kicking in.
Jim Darlas
"Can Do!"
http://www.esteemedwoodcrafts.com/
http://www.esteemedplaques.com/
"Can Do!"
http://www.esteemedwoodcrafts.com/
http://www.esteemedplaques.com/