Recipe Box
- Mark's Wood Chips
- Vectric Craftsman
- Posts: 201
- Joined: Thu Mar 19, 2015 12:36 pm
- Model of CNC Machine: ShopSabre 23 with Rotary
- Location: Hubertus, WI 53033
- Contact:
Recipe Box
I made this recipe box for my wife based on Michael Tyler's Paradise Box. It is hard maple about 5/8" thick and finished with 3 coats of lacquer. The sides and inside top are custom engraved and the sides have a gentle arc from top to bottom. Thanks for looking at my first post with photos.
-
- Vectric Wizard
- Posts: 1479
- Joined: Sun Nov 28, 2010 5:10 pm
- Model of CNC Machine: Home built designs - 3'x4' and 5'x12'
- Location: Eastern NC, USA
Re: Recipe Box
Nice work Mark. It's always good to see more variants of the Paradise Box.
CarveOne
CarveOne
CarveOne
http://www.carveonecncwoodcraft.com
http://www.carveonecncwoodcraft.com
- martin54
- Vectric Archimage
- Posts: 7339
- Joined: Fri Nov 09, 2012 2:12 pm
- Model of CNC Machine: Gerber 48, Triac PC, Isel fixed gantry
- Location: Kirkcaldy, Scotland
Re: Recipe Box
As CarveOne has already said nice work Mark, lots of different variations of the box, guessing Michael didn't predict that when he first put it out as a vectric project lol
I've done a few slightly different variations all based around the original idea.
I've done a few slightly different variations all based around the original idea.
-
- Vectric Craftsman
- Posts: 135
- Joined: Tue Jun 05, 2012 12:45 am
- Model of CNC Machine: Zenbot 2448
- Location: Belpre Ohio
Re: Recipe Box
Mark,
Nice job and it gives it another use (appearance). So... what is the size of the inside compartments with your design?
- Bill
Nice job and it gives it another use (appearance). So... what is the size of the inside compartments with your design?
- Bill
- Mark's Wood Chips
- Vectric Craftsman
- Posts: 201
- Joined: Thu Mar 19, 2015 12:36 pm
- Model of CNC Machine: ShopSabre 23 with Rotary
- Location: Hubertus, WI 53033
- Contact:
Re: Recipe Box
Hi Bill:
The inside dimension (inches) of each compartment is 5.625W x 3.75H x 6.5D, the divider is 3.125H. It is roomy enough for 3x5 index cards with plenty of space for the chain. I made some drop in blocks to keep the cards upright as each compartment fills. I asked my wife to hand write each card because we received a bunch of hand written recipes from our parents after they passed and we cherish not only the great recipes but also the hand writing of our moms.
Mark
The inside dimension (inches) of each compartment is 5.625W x 3.75H x 6.5D, the divider is 3.125H. It is roomy enough for 3x5 index cards with plenty of space for the chain. I made some drop in blocks to keep the cards upright as each compartment fills. I asked my wife to hand write each card because we received a bunch of hand written recipes from our parents after they passed and we cherish not only the great recipes but also the hand writing of our moms.
Mark
-
- Vectric Craftsman
- Posts: 135
- Joined: Tue Jun 05, 2012 12:45 am
- Model of CNC Machine: Zenbot 2448
- Location: Belpre Ohio
Re: Recipe Box
Mark,
Thanks for the reply.
Thanks for the reply.