Dust Deputy - Mounting Hole Pattern

An area to upload images of pieces cut using VCarve Pro
Post Reply
dwwright
Posts: 30
Joined: Sat Apr 11, 2015 4:24 am
Model of CNC Machine: JGRO

Dust Deputy - Mounting Hole Pattern

Post by dwwright »

This probably isn't gallery worthy, but for anyone assembling their own Dust Deputy to use with their CNC it might save you some time.

I used a .125 endmill and a center datum, cutting a total depth of .25". I used a screw to hold down the lid in the center, then zero'd X, Y, & Z (about 1/16" above) over the center of the screw

Image

Image
Attachments
DustDeputyMountHoles.crv
(110 KiB) Downloaded 211 times

Savannahdan
Vectric Wizard
Posts: 520
Joined: Sun May 03, 2015 12:25 pm
Model of CNC Machine: Axiom AR8
Location: Savannah, GA

Re: Dust Deputy - Mounting Hole Pattern

Post by Savannahdan »

Excellent. I'm using a dust deputy with shop vac currently and this file will be handy if the top gets damaged. I have a SteelCity dust collection system that needs to be relocated. CNCs generate a lot of wood waste and the shop vac won't be able to handle things long term. Especially since my shop vac is about 15 years old.
Thank you..

User avatar
scottp55
Vectric Wizard
Posts: 4713
Joined: Thu May 09, 2013 11:30 am
Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP11.5
Location: Kennebunkport, Maine, US

Re: Dust Deputy - Mounting Hole Pattern

Post by scottp55 »

Thanks for the effort:)
Use the steel canister DustDeputy on both our Shopbot Desktops and with a Fein II with HEPA it's a perfect combo in the shop.
Highly recommend for small machines.
Pic is HEPA filter and canister after almost 2 years use with no cleaning except dumping the Deputy.
scott
Attachments
SDD HEPA original.jpg
I've learned my lesson well. You can't please everyone,so you have to please yourself
R.N.

Post Reply